- Home
- JGBS23DEM7CC
- Instructions
JGBS23DEM7CC General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Interior light needed replaced
22 of 46 people
found this instruction helpful.
-
Leo from TWIN FALLS, ID
- Really Easy
- Less than 15 mins
-
Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
burner would not light properly and flame uneven around the burner
9 of 10 people
found this instruction helpful.
-
Bret from South Haven, MI
- Really Easy
- Less than 15 mins
determined that the top of the burner was melted and malformed. Repair was simple: lifted off the damaged burner and slipped the new one in place.
Was this helpful?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
18 of 38 people
found this instruction helpful.
-
Barbara from BELLEVUE, WA
- Very Difficult
- Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl
... Read more
iance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Read less
Was this helpful?
Thank you for voting!
Replace Oven light socket and light bulb in kitchen Range
6 of 6 people
found this instruction helpful.
-
Ronald from TUCSON, AZ
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set, Wrench set
1) Turn off power at circuit breaker panel
2) Slide out Range from wall
3) Unplug Range
4) Remove back panel and unplug electrical connections to socket
5) From front of oven, remove glass cover over old oven light bulb and remove flange that holds socket and bulb
6) Remove old socket from mounting flange and disc ... Read more ard.
7) Place new socket into mounting flange
8) Screw mounting flange and new socket into the oven from front. Reattach electrical connections from back.
9) Screw in new light bulb from front
10) Replace existing glass cover over new light bulb and snap wire holder in place
11) Replace back panel
11) Plug in range
12) Slide range back to original position
13) Turn on power
Works like a charm! Thanks for having the parts after 30 years!
2) Slide out Range from wall
3) Unplug Range
4) Remove back panel and unplug electrical connections to socket
5) From front of oven, remove glass cover over old oven light bulb and remove flange that holds socket and bulb
6) Remove old socket from mounting flange and disc ... Read more ard.
7) Place new socket into mounting flange
8) Screw mounting flange and new socket into the oven from front. Reattach electrical connections from back.
9) Screw in new light bulb from front
10) Replace existing glass cover over new light bulb and snap wire holder in place
11) Replace back panel
11) Plug in range
12) Slide range back to original position
13) Turn on power
Works like a charm! Thanks for having the parts after 30 years!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Burnt burner
7 of 12 people
found this instruction helpful.
-
Janine from Wind Gap, PA
- Really Easy
- Less than 15 mins
Just put it on. Quite proud of myself for figuring out what and how to get the part however! The website was very helpful.
Was this helpful?
Thank you for voting!
I needed another oven rack. It came with two. Now I have three.
6 of 9 people
found this instruction helpful.
-
Frank from N ROYALTON, OH
- Really Easy
- Less than 15 mins
I cut the box open with a utility knife and removed the grill. I then opened the oven door and rearranged the two existing racks so that the third one would go in so they all have the same distance between each of them. I slid the new rack into position. It didn't go in smoothly though as I had to push it in and out several times so that
... Read more
it would line up perfectly. Finally in went in all the way. Then I closed the oven door and went and sat down to think about the wonderful job I just did.
Read less
Was this helpful?
Thank you for voting!
Needed To Replace Burner
5 of 6 people
found this instruction helpful.
-
Robert K from York, PA
- Really Easy
- Less than 15 mins
Took longer to open the box.
Was this helpful?
Thank you for voting!
Burner on stove not working correctly
4 of 6 people
found this instruction helpful.
-
Trevor from Eldersburg, MD
- Really Easy
- Less than 15 mins
Order parts and installed - no tools needed - completed repairs less than 1 minute
Was this helpful?
Thank you for voting!
GOT 1-SMALL 2-MEDIUM 0-LARGE CAPS
2 of 2 people
found this instruction helpful.
-
Teddy from Bel Air, MD
- Difficult
- Less than 15 mins
PLEASE BE ADVISED WHEN THEY SHIPPED THE BACK ORDER 1 -(taupe) LARGE CAP - RECEIVED 4 BLACK CAPS - 1-SMALL
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!
Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!
... Read more r />your advice?
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!
Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!
... Read more r />your advice?
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
The burner caps were chipped and discolored.
2 of 2 people
found this instruction helpful.
-
Anne from OSSINING, NY
- Very Easy
- Less than 15 mins
I merely replaced the old caps with the new ones. It couldn't have been easier!
Other Parts Used:
Was this helpful?
Thank you for voting!
Missing Burner Caps.
3 of 5 people
found this instruction helpful.
-
GLENDA from HENDERSON, NV
- Really Easy
- Less than 15 mins
Caps were shipping very quickly. Price was very reasonable. Very happy with parts-selects service.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner had uneven flames
3 of 5 people
found this instruction helpful.
-
Akshay from Bridgeton, NJ
- Really Easy
- Less than 15 mins
Too easy a five year old could do it
Was this helpful?
Thank you for voting!
F 3 code came on my panel, the oven wasn’t getting to the right temperature
2 of 2 people
found this instruction helpful.
-
Enrico from DURHAM, NC
- Very Easy
- Less than 15 mins
-
Wrench set
I remove the old thermostat and realized right away it was burned, the replacement was very easy to clip on
Was this helpful?
Thank you for voting!
Oven not lighting
2 of 2 people
found this instruction helpful.
-
Charles from SAINT LOUIS, MI
- Really Easy
- 30 - 60 mins
-
Nutdriver
Secured the power, Opened the back of the range, and discovered a rodent chewed the wires in half so I striped the ends and wired them back together, the oven works great !!
Was this helpful?
Thank you for voting!