Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Loose
0 of 1 peoplefound this instruction helpful.
Donald from Mount Washington, KY
Really Easy
Less than 15 mins
Screw drivers
Installed brackets
Was this helpful?
Thank you for voting!
With qrantz counter top needed to secure dishwasher to side not top of cabinet opening.
0 of 1 peoplefound this instruction helpful.
Scott from Rapid City, SD
Really Easy
15 - 30 mins
Pliers
Solution was very simple with the side mounting bracket kit, the only problem was somehow one of the brackets was damaged out of the box . There's a slight off-set on the bracket to allow it to fit properly next to the dishwasher but this one had been flatten out. Had to have happened before going into the shipping box because they were v
... Read moreery well protected with bubblewrap. Also, brackets are fairly heavy gage metal so it would have taken some amount of force to do this. Fortunately I was was able to bend it back into a useable shape. It wasn't perfect to look at but because it's mounted behind the side of the dishwasher it didn't matter as long as it worked.
Read less
Was this helpful?
Thank you for voting!
The Dishwasher was not firmly connected to the counter
0 of 2 peoplefound this instruction helpful.
Antony from Lakewood Ranch, FL
Really Easy
Less than 15 mins
Screw drivers
Very simple repair when you're supplied with the proper parts. Their delivery time is exceptional !
Was this helpful?
Thank you for voting!
Screws on the door of the dishwasher were very loose.
1 of 6 peoplefound this instruction helpful.
Kathryn from Carol Stream, IL
Really Easy
Less than 15 mins
Screw drivers
Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!
Was this helpful?
Thank you for voting!
black scratchers from wheel chair
3 of 12 peoplefound this instruction helpful.
Linda from GLEN CARBON, IL
Very Easy
30 - 60 mins
shook bottle and painted waited a day and repeated
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read moreoring refer handles. Thank you
Read less
Was this helpful?
Thank you for voting!
Under Counter Anti-Tip Brackets Broke
Scott from Maple Valley, WA
Really Easy
Less than 15 mins
Pliers, Screw drivers
I put this unit in about 3 years ago and the brackets broke at the crease and the dishwasher fell forward. Found the right bracket and when it arrived looked a match. Checked link to video showing how to properly install the brackets. The original manufacturer never stated that the tab that goes through the frame is supposed to be bent 90
... Read more degrees to prevent the bracket from coming out. Thank you PartSelect for that video because I would probably end up ordering brackets again in a few years.
Read less
Was this helpful?
Thank you for voting!
I had not needed to install the mounting brackets that came with the dishwasher because the old counter top was 1 inch lower than standard and I was able to just wedge the dishwasher into the space and it would not tip.
Bob from Montrose, CO
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
I simply disconnected the power line to the dishwasher and pulled it out enough to install the mounting brackets. The installation manual that came with the dishwasher described how to install the brackets and I simply followed directions.
My Orders
