- Home
- JDP36BW3WH
- Instructions
JDP36BW3WH General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burned out element
0 of 1 people
found this instruction helpful.
-
Ellen from Carmichael, CA
- Really Easy
- Less than 15 mins
-
Socket set
Turned off circuit breaker, removed the two screws, pulled out the wires, unhooked the connections and hooked up the new element. Put the two screws back in, turned on the power and it worked! So, so easy! I wouldn't have attempted it had it not been for the other stories associated with the part I purchased.
Was this helpful?
Thank you for voting!
coil burned out
0 of 1 people
found this instruction helpful.
-
william from east stroudsburg, PA
- Really Easy
- Less than 15 mins
-
Pliers
replace coil 2 clips off 2 clips on........
Was this helpful?
Thank you for voting!
Bake element burnt apart
0 of 1 people
found this instruction helpful.
-
Roger from Barnesville, OH
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
I removed the 2 screwws inside the oven cavity and pulled the element towards me. I unplugged the wires from the element and plugged in the new one and secured it in place with the 2 screws.
Was this helpful?
Thank you for voting!
Broken bake element
0 of 1 people
found this instruction helpful.
-
Harvard Folding Box Co from Lynn, MA
- Really Easy
- Less than 15 mins
-
Nutdriver
Shut off electrical supply to stove.Remove 2 screws.
Slide element out enough to remove connectors from element.
Position new element.Slide connectors onto new element.
Slide element back into position.Replace 2 screws.Turn on electrical supply.
Slide element out enough to remove connectors from element.
Position new element.Slide connectors onto new element.
Slide element back into position.Replace 2 screws.Turn on electrical supply.
Was this helpful?
Thank you for voting!
Heating element worn-out
0 of 1 people
found this instruction helpful.
-
Mary from Bivalve, MD
- Really Easy
- Less than 15 mins
-
Pliers
Turned off the breaker to the stove, removed oven racks, used small pair of plyers to remove bolts (2) holding defective element in place. Pulled (2) wires that had a snap connection apart. Old element was not removed. Connected (2) snap wires, pushed them back into the oven wall, used plyers to re-connect the element to oven. Install
... Read more
ation DONE!
Turned on breaker and then the oven; we are now baking again.
Turned on breaker and then the oven; we are now baking again.
Read less
Was this helpful?
Thank you for voting!
Bake element had broke and caught fire
0 of 1 people
found this instruction helpful.
-
Joey from barto, PA
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
It was real easy all I had to do was turn the breaker off,Undo two srews and disconnect the two wires. Then repeated the process to install
Was this helpful?
Thank you for voting!
Heating element broke and not working
0 of 1 people
found this instruction helpful.
-
brad from flatwoods, KY
- Really Easy
- Less than 15 mins
-
Socket set
Watched youtube....
Was this helpful?
Thank you for voting!
old bake element broke
0 of 1 people
found this instruction helpful.
-
Andrew from Cary, MS
- Easy
- Less than 15 mins
-
Nutdriver, Pliers
This is how I did it--but I would strongly recommend you do step 4 first, and skip step 3! Remember, because 240V circuits have 2 "hot" wires, they may be "hot" (120V to ground) even when switched off!
1. Removed the mounting screws with a nut driver.
2. Pulled out the old element. BARE lug connectors on loose wires came ... Read more out with it.
3. Watched an impressive show of sparks.
4. TURNED OFF THE CIRCUIT BREAKER.
5. Separated the connectors. Had to use pliers on the one I "fried".
6. Connected new element (connectors pushed together easily.
7. Reattached with screws
8. Turned breaker back on.
1. Removed the mounting screws with a nut driver.
2. Pulled out the old element. BARE lug connectors on loose wires came ... Read more out with it.
3. Watched an impressive show of sparks.
4. TURNED OFF THE CIRCUIT BREAKER.
5. Separated the connectors. Had to use pliers on the one I "fried".
6. Connected new element (connectors pushed together easily.
7. Reattached with screws
8. Turned breaker back on.
Read less
Was this helpful?
Thank you for voting!
Heating element broke and not working
0 of 1 people
found this instruction helpful.
-
brad from flatwoods, KY
- Really Easy
- Less than 15 mins
-
Nutdriver
Watched youtube. Easy and fast!
Was this helpful?
Thank you for voting!
bake element in oven burned out
0 of 1 people
found this instruction helpful.
-
Amy from Etna, CA
- Easy
- Less than 15 mins
-
Wrench set
Using a wrench, removed old element and simply installed new one - took less than 10 minutes and the oven was working again! Best part was how quickly the item reached us - ordered it on a Wednesday afternoon and had it by Friday afternoon, with no expedited shipping - Great Service!
Was this helpful?
Thank you for voting!
Bake element burns out heating up easter dinner
0 of 1 people
found this instruction helpful.
-
joseph from mastic, NY
- Really Easy
- Less than 15 mins
Uplugged the oven and undid the back contact cover, removed the nuts inside the oven and slid out the element. Pushed the new element into place and secured it. Attached the contacts and replaced the cover. Plugged it in and got cookin'.
Was this helpful?
Thank you for voting!
wasn't heating anymore
0 of 1 people
found this instruction helpful.
-
nelson from milan, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
orderd a replacement part. recieved it two days later then that evening installed it. there was a video online to show how to replace it. very useful if your not a do it yourselfer.
Was this helpful?
Thank you for voting!
A few days before Christmas, my lower oven heat element went out.
0 of 1 people
found this instruction helpful.
-
Patsy from Rosharon, TX
- Really Easy
- Less than 15 mins
-
Socket set
I went on-line, found Partselect.com, they gave me the part number, showed me a video on the repair details, shipped the part overnight, and within ten minutes of the arrival of the part, I was up and running. EXCELLENT SERVICE! Thanks for saving Christmas at our house!!
Was this helpful?
Thank you for voting!
Element not working
0 of 1 people
found this instruction helpful.
-
Louis M from South Salem, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
You literally saved our Christmas from a disaster! Four days before Christmas our bake element gave out and we discovered it had split. We found you on the Internet, ordered the part, and prayed you would deliver as promised. We received it the next day, as promised, and in time to cook Christmas dinner. It was a snap to install, lite
... Read more
rally took five minutes. Your service, response time and instructions were perfect. Keep up the good work!
Read less
Was this helpful?
Thank you for voting!
Oven would not heat
0 of 1 people
found this instruction helpful.
-
Sheryl from Pahrump, NV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I watched the video on the website then installed the part. In fact, I watched the video twice because I could not believe it was that easy. You can not do any better than PartSelect. Shipping is fast and the instructions are great. If I ever need a part for any appliance I will go to PartSelect.com first. Keep up the great work and thank
... Read more
-you so much!
Read less
Was this helpful?
Thank you for voting!