EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCSP39BW2BB General Electric Range - Instructions

All Instructions for the JCSP39BW2BB
121 - 135 of 322

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bottom element would not heat
0 of 1 people found this instruction helpful.
  • GARY from OREM, UT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Remove two screws holding element. Pull element forward exposing connections. Pull connections apart. Replace with new element. replace screws. Done
Was this helpful?
Thank you for voting!
Two stage burner was not working on the outer part of burner.
0 of 1 people found this instruction helpful.
  • Gregory from Pleasant Valley, MO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Locate breaker box and turn off breaker to stove. Removed the two screw in front that hold the top in place. Raised the top and supported it with the box the new burner came in. Removed two screws that held the burner in place and the 5 wires one at a time an installed them on the new burner. Put new burner in place and installed two mounting screws. Reinstalled the two screws in the front to hold the top in place then turned the breaker back on and tested burner. Worked great. Received part in 2 days.
Was this helpful?
Thank you for voting!
baking element sparking
0 of 1 people found this instruction helpful.
  • Maureen from Cedar Falls, IA
  • Really Easy
  • 15 - 30 mins
  • Pliers
1. Turned breaker to the oven to the off position.
2. Removed screws from back of oven-This was the most difficult part of the entire process!
3. Pull out element about 3", then tugged a little harder to expose the wiring.
4. Unhooked wiring from element.
All of this took about 15 minutes.
When new one arrived (less than 48 hours), I did the reverse of the above. This took about 6 minutes replace with new element. Thanks so much!
Was this helpful?
Thank you for voting!
Heating element burned out
0 of 1 people found this instruction helpful.
  • Kim from Munsonville, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the two screws pulled out the old element and slid the new element in and put the screws back in. I used it that night to bake supper
Was this helpful?
Thank you for voting!
Cracked Baking element in Stove
0 of 1 people found this instruction helpful.
  • Lionel from Luling, LA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Removed two scres that hold element in Place. Pulled out element about 3" and removed wire disconnect. Re-connected new element and re-installed mounting screws. Very easy. Parts were delivered promptly. Great service!!!! Thank you Parts select!!!!! Saved me a trip to Sears to purchas a new element or Stove.
Was this helpful?
Thank you for voting!
notice oven wasnt getting hot, seen a burned spot on lower burner in oven, knew then it needed to be replaced.
0 of 1 people found this instruction helpful.
  • Rhonda from Rincon, GA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
After noticing it needed replaced I went to PartSelect, put in model/serial# and order that easy. It was here the next day. The oven was fixed. Now back to baking...thanks PartSelect.
Was this helpful?
Thank you for voting!
Baking heating element burned out, had an open
0 of 1 people found this instruction helpful.
  • Rica from Duluth, GA
  • Really Easy
  • 15 - 30 mins
  • Pliers
Turned off circuit breaker for Range. Removed the 2 screws holding element and pulled wires attached to the element through holes. Disconnected the wires and attached new element. Had problem with one wire springing back into hole used paper clip to fish it back out of hole and then connected 2nd wire to heating element. Turned breaker ba ck on and tested. Baked a cake. MMMMMMMM.
Was this helpful?
Thank you for voting!
The baking element was not heating up
0 of 1 people found this instruction helpful.
  • Karen from Leland, NC
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I followed the directions in the video on the website. The repair was so easy!! I simply unscrewed the screws holding the element in place at the back of the oven, pulled the wires out. This did take a little bit of time, as I didn't want to pull the wire off of the element and lose it in the back of the oven, but I was able to eventua lly work it free from the insulation and make the connectors visible. I slid off the old element, slid the wires back on to the new one and pushed them back into the wall of the oven and replaced the screws. Works like a charm!! I will definitely use your website for other appliance repairs!!
Was this helpful?
Thank you for voting!
Bottom element broke in half
0 of 1 people found this instruction helpful.
  • jason from newcastle, WY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Pulled oven from wall, Unplugged oven from outlet, Took 5/16 nut driver pulled back cover off oven to expose the quick connect wires, Pulled wires off old element, Opened oven door took the 2 screws off bracket on back of oven, Removed old element, Put new element in place, Put the 2 wires back on, Buttoned back up check to see if worked it did ((:
Was this helpful?
Thank you for voting!
bake element arked
0 of 1 people found this instruction helpful.
  • robert from mount pleasant, SC
  • Really Easy
  • 15 - 30 mins
  • Socket set
After watching the video on your website the repair was a cinch. I would never have attempted doing it if I hadn't seen your video. Thanks for saving us a lot of money.
Was this helpful?
Thank you for voting!
Element turned into a welder
0 of 1 people found this instruction helpful.
  • Greg from Hamburg, IA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
pulled out oven, unplugged power. Removed back cover for element, disconnect old element. Moved to front of oven and removed the two screws that held the old element,removed old element. Installed new element, connect element, installed cover, reconnect power.
Was this helpful?
Thank you for voting!
The bottom bake unit burned out
0 of 1 people found this instruction helpful.
  • Larry from Fredericksburg, VA
  • Really Easy
  • 15 - 30 mins
  • Socket set
Very simple. Two small hex shaped screws hold the unit to the back of the stove. Remove those with a small socket wrench. Rachet type makes the job easier. Gently pull the element from the back of the stove. Remove the two push-on wires from the element. They simple pull off. The elements have supporting feet toward the front. Thos e must be down to rest the element on the bottom of the stove. Replace the push-on wires, push the element back into the holes in the rear of the stove and screw the small hex shaped screws back into the oven wall. The job is done.
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • eric from Melbourne, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
With less than 24 hrs from ordering to delivery, I was making cookies. Installation was quick and painless.
Was this helpful?
Thank you for voting!
bake element burned out
0 of 1 people found this instruction helpful.
  • Dean from Rolla, MO
  • Easy
  • 15 - 30 mins
  • Nutdriver
I turned the power off.Pushed on the terminals,and used a nut driver to secure the element to the oven back wall.Great service.I recieved the part in 24 hours with reg. shipping at a great price,Unbelieveable!!!
Was this helpful?
Thank you for voting!
Old Element Was Rusted.
0 of 1 people found this instruction helpful.
  • Joan from Mascotte, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Very well, I made a mistake with the model #. So I had to return and reorder .
Was this helpful?
Thank you for voting!
All Instructions for the JCSP39BW2BB
121 - 135 of 322