JCS57Y5WW General Electric Range - Instructions

We read comments by other DIYers and then looked at the video on YouTube. Our range is old and the screw holding the clamp for the block was too tight to remove so we removed the block from the old clamp and left clamp intact. Turned the circuit breaker off. Cut the existing wires and wired the new block to them. Put the block back into t ... Read more he old clamp, put new surface burner in and good as new. My boyfriend and I did it together but I could have done it myself - it was that simple. Thanks PartSelect for quick delivery and excellent DIY info.

Replaced existing drip bowls with new. Removed elements and rusted drip bowls. Used shop vac to remove corroded pieces of old drip bowls and cleaned range top installed new drip bowls and returned elements to their sockets