JCS57H4 General Electric Range - Instructions

Easy

I followed the instructions from a previous customer posted on your web site. The only tip I would add is make sure you get a snug connection on the element with the connectors on the wires. I used a pair of needle nose pliers and gave it a little squeeze. My concern was I didn't want the wires to come off when I pushed them back throu ... Read more gh the wall behind the insulation. We are having pizza tonight!

nutdriver to remove unplugged ends plugged ends of new one metal screws thats it

Replaced drip pans that the apartment Superintendent had in place with the correct drip pans and now cooking is beautiful again! No more uneven cooking on the stove top.

Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.

Removed burner from each one. removed drip bowl. Inserted new bowl. Replaced burner. Excellent help from order people so I got the correct bowl was irreplacable.

Removed the burner elements, removed and disposed of old drip pans, cleaned the area, relaced with new drip pans and replaced the burner elements. Verified all burners were level - good as the day it was new!

Ordered the drip pan from ParSelect.com. Unplugged element and took out old pan. Placed new pan in and replaced element. For the first time in many years, the part fit.

After replacement of burner element to no joy, ordered and replaced the infinite switch control. Turned off and tagged range circuit breaker. Lifted top range surface and propped up. Removed screws of control panel back cover and removed cover exposing the front panel control switches and wiring. Tested for any voltage on exposed con ... Read more nectors with multimeter. Noted that replacement switch and old switch had different connector physical layout. Drew a layout of both switch connectors on paper noting that while connector tabs were in different locations the labels of each connection was clearly labeled and matched. Pulled off the knob from old switch and removed the two screws holding it on front control panel. Pulled old switch out at the back of the panel. Then using needle nose pliers pulled one connector at a time from old switch and moved to new switch matching labeled connectors. Reinstalled new switch, back cover, lowered range surface top, turned breaker back on, and new burner control works great.