JCP67F2WW General Electric Range - Instructions

i really wanted a new stove, but budget wouldn't permit; so just had to insert the new ones and they work great with level cooking.

Replaced with the new burner works like new. Thanks a bunch!

Unplugged old burner elements. Popped in new burners. Turned on the burners to test.

pulled out the old burner, plugged in the new burner. Turned on the power and it heated up very quickly.

The removal of the old burner and installation of the new burners was easy. Just lift the opposite side that rests on the rim and pull burner out. New burner then gets inserted and the opposite side goes right into rim. It took all of 30 seconds to replace both burners. I wish I had replaced these when they first started to go!!

First, I called my son over to do the repairs. He shut the power to the oven off at the breaker box, he then unplugged the oven from the wall outlet, just to be extra safe. Next, he gently pried the door switch out from the face of the oven using a small flat bladed screw driver. Once the switch was out he tied a piece of twine to the connector/plug before unplugging the switch. He then plugged the new switch in, untied the twine and carefully pushed the switch back into the hole on the face of the oven. Reconnected the pigtail to the outlet and turn the power back on at the breaker box. After watching my son do this repair I believe I could have done it and I'm 70 years old, well everything but move the oven out to unplug it from the wall outlet.

I was happy to see that PartSelect offered one which specifically matched the GE part number I wanted and it also specifically said it is a GE replacement.
I received the parts and have not yet gone over to my parent's house to try and install them, but I am a bit wary.
The label on the parts I received (with the appropriate PartSelect part number) states "Fits most leading brands of electric ranges EXCEPT GE* and Hotpoint."
I have my fingers crossed that this statement is incorrect and that they actually fit!

Of course, power off first, then I removed the old one and inserted the new one, make sure everything in right place, then turn on power, simple as 1-2-3.

Pulled out element, plugged in new element. About 5 seconds.

Simply removed new burner from box and plugged it in! Very pleased with 3 day speedy delivery. Confident my 32 year old cooktop will continue to give many more years of service with any parts needed from PartSelect.

After finding the correct Y-frame, inches and watts in a surface burner, it was easy to just slide in the slots. Tested, and it was perfect. Now it makes all of the other burners look bad. Thanks. Your site was the only one, that I was sure I had the correct part.

Since it was a plug-in burner, only needed to pull it out and put the other one in.

Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.

the part arrived in two days. Just had to remove the old one and pop in the new one and it was that easy. I was amazed at how soon the part was delivered and happy to have a working burner again.

pulled out old burner and pushed in new burner.
No tools needed.

I ordered the 2 burners that were not working. When I got the burners, I discovered that one of the burners was still working and the wiring under that on had burned out. So I ordered the little box kit and repaired it. I only needed to strip wires and twist together and replace the small box. Now all are working and I am cooking with all four burners again. All for about $50.