My Orders
- Home
- JCP336DD2BB
- Instructions
JCP336DD2BB General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stovetop radiant burner went out
6 of 10 people
found this instruction helpful.
-
Frank from Marietta, GA
- Easy
- 15 - 30 mins
-
Screw drivers
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.
Was this helpful?
Thank you for voting!
Element broket
4 of 5 people
found this instruction helpful.
-
Marco Antonio from CORP CHRISTI, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
1.- going online to orden part 2 disconnect the power from the aplaince shoot Dow the power 3 tear down the appliance and disconnect the four terminals from the damage part reconnect the terminals to th new part reensamble the appliance and ready to go save $275 bucks in handy man labor
Was this helpful?
Thank you for voting!
8 Inch Burner Inop.
-
DONNA from EAST MEADOW, NY
- Really Easy
- 15 - 30 mins
-
Socket set
Remove range top [ten phillips screws] remove electrical connectors and lift out burner. Reverse procedure for installation.
Was this helpful?
Thank you for voting!