- Home
- JCBP81DM1BB
- Instructions
JCBP81DM1BB General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
dropped & broke the oven light bulb cover
1 of 2 people
found this instruction helpful.
-
joseph from san jose, CA
- Really Easy
- Less than 15 mins
popped the new one on!
Was this helpful?
Thank you for voting!
Knob stem broke off.
1 of 2 people
found this instruction helpful.
-
DALE from FREMONT, NE
- Very Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
Pulled stove out to access back panel. Unscrew broken switch/stem. Replaced each wire one at a time to make sure they went in right spot. Screw in new switch. Replaced back panel.
Was this helpful?
Thank you for voting!
oven was not getting up to temp
0 of 1 people
found this instruction helpful.
-
walter from townshend, VT
- Really Easy
- Less than 15 mins
-
Nutdriver
Once I opened up the back of the range, the sensor wires where there and burnt just like your info said. One nut to take off in the oven and the sensor came right out and the new one went right in. The oven works great, cooked the turkey today. The worst part of the repare was the cleaning behind and under the range, it hasn't moved since
... Read more
it was put in 6 years ago. Very pleased with PS.
Read less
Was this helpful?
Thank you for voting!
fried oven control using raid
4 of 13 people
found this instruction helpful.
-
Kerry from Loveland, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
replaced oven clock control ref maintenance manual, 4 screws and 8 wires. plugged in new control and op checks good.
Was this helpful?
Thank you for voting!
F2 error when oven was heating up, along with a beeping noise and then it shut off
0 of 1 people
found this instruction helpful.
-
Lori from Paris, TN
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Unplugged oven, turned off breaker, took cover off back of oven, removed old sensor by disconnecting in back of oven and undoing screw inside oven. Pulled old one out replaced with new took 15min. Cost me less than $20. Parts Select rocks! Even received part in two days with standard shipping!
Was this helpful?
Thank you for voting!
F2 error code
0 of 2 people
found this instruction helpful.
-
jud from gatesville, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
Really easy fix. Unplug oven. With a 5/16 nut driver take the 5 screws out of the center long tin cover and remove. Unplug little white temperature sensor plug located between broil heating element. Open oven door and remove one screw holding temp. sensor using same nut driver and simply pull out old sensor. Install new sensor. It's tha
... Read more
t easy. No more f2 been working like a champ!!!
Read less
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people
found this instruction helpful.
-
Roscoe G from ROCHESTER, NY
- Very Easy
- Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
Missing oven racks
-
charles from tonopah, AZ
- Really Easy
- Less than 15 mins
Ordered the racks then put them in when they arrived.Correct parts got here when Pat Select said they' be here.
Was this helpful?
Thank you for voting!
clock, over control, oven light , timer did not work
-
Robert from Austin, AR
- Really Easy
- Less than 15 mins
-
Nutdriver
remove rear panel cover, removered four screws that held control panel, disconnected colored wires, removed circuit control board, reinstall new board and connected color coded wire to the correct spot on the board, plugged in 220 volt cord, switch on circuit breaker, everything worked normal again
Was this helpful?
Thank you for voting!
Orange light "Hot Stovetop" lense broke off.
-
John from Woodbridge, VA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven r
... Read more
emoved. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.
Read less
Was this helpful?
Thank you for voting!
Flashing F2 and erratic temperature readings.
-
Kenneth from Salem, OR
- Really Easy
- Less than 15 mins
-
Nutdriver
Unplugged from wall outlet, then opened oven front door. Reached in and removed two screws. Pulled oven sensor threw and detached electrical connector from old sensor. Plugged in new oven sensor and reversed removal procedure. No more Flashing F2 and oven temperature came to ready. Very easy.
Was this helpful?
Thank you for voting!
Bad control board
-
Daryl from Savannah, TN
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Removed top back plate of oven. unpluged all of the wiring plugs on the control board. Removed two screws on the control board. Removed face plate from old control board and put it on the new control board. Atteched new board with the two screws. Connected all of the plugs to new board ( all plugs are color coded to board). Re-installed o
... Read more
ven back plate. Pluged oven in. Works great.
Read less
Was this helpful?
Thank you for voting!
Dual burner on range stopped working.
-
Robert from Estero, FL
- Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
Changed out the burner with a new replacement and it still didn't work. The socket on the old burner had a burn mark on it. The infinite switch operated sloppy not crisp like the other burners.Ordered a replacement online. Moved the range away from wall and cabinet and shut off electric at panel box. Removed upper back panel. removed swit
... Read more
ch knob and 2 screws holding switch. Compared electrical connections of both switches and saw that they were different. Read instructions which were included with new switch and found diagram for connecting old lead to new lead correctly. After all leads were connected, remounted new switch powered up and tested OK.
Read less
Was this helpful?
Thank you for voting!
Oven light wire broken, damaged socket
-
Patricia from Brandenburg, KY
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.
Was this helpful?
Thank you for voting!
oven control panel was blacked out..no clock no start.
-
Pam from Daphne, AL
- Easy
- 15 - 30 mins
-
Screw drivers
Took out the old control module and removed the sticker and reattached sticker to new part and installed the plugs, put the screws back in and it started working, thankyou so much.
Was this helpful?
Thank you for voting!