EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP77SP1SS General Electric Range - Instructions

All Instructions for the JCBP77SP1SS
61 - 74 of 74

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Sensor Replacement
  • Barbara from Edwardsville, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver
The part was just like the old one and would have been an easy fix except our range suffered from a lighting hit. The clips had melted together. Called a dealer and asked about a new wiring harness. He said in those cases just cut the clip off and hard wire with wire clips,or firecrackers. We used wire nuts and taped all together and the oven works just great. Nothing is ever as easy as it should be.
Was this helpful?
Thank you for voting!
Oven light wire broken, damaged socket
  • Patricia from Brandenburg, KY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.
Was this helpful?
Thank you for voting!
Replacment of burner control switches
  • Judith from Keezletown, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I watched your video on the subject and followed it exactly. It explained everything I needed to know. The hardest part was CLEANING under the stove once I pulled it out from the wall!
Was this helpful?
Thank you for voting!
Pilot light out
  • Henry from Sonoita, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Removed the power plug from the wall, screwdriver and small socket allowed me to remove the front control panel. Once I located the pilot light I pulled off the holding clips and placed a new light into the holding clips...problem solved.
Was this helpful?
Thank you for voting!
The stove-top knob broke
  • JUDITH from COLORADO SPRINGS, CO
  • Really Easy
  • Less than 15 mins
I pushed the knob into place. No tools, approximately 30 seconds and good as new.
Was this helpful?
Thank you for voting!
Center Of Knob Broken
  • Wayne from Blakely, GA
  • Really Easy
  • Less than 15 mins
No repairs-----new knob ordered & recieved
Was this helpful?
Thank you for voting!
Orange light "Hot Stovetop" lense broke off.
  • John from Woodbridge, VA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven r emoved. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.
Was this helpful?
Thank you for voting!
Plastic glide broke
  • Mary Ann from Granby, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.
Was this helpful?
Thank you for voting!
All Instructions for the JCBP77SP1SS
61 - 74 of 74