EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP66DP1WW General Electric Range - Instructions

All Instructions for the JCBP66DP1WW
121 - 135 of 161

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
8 inch burner was burnt out
  • Luis from Kissimmee, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
replacement was easy. pulled away the stove from wall. unplug the stove. open oven door. remove the two hex head screws holdings stove top. raise the stove top in the front. supported stove top with a 16 inch piece of wood. place New Burner under old burner. remove old burner remove wires remove old burner and place it on top of new burn er connected the wires from burner to new burner. install new burner. remove support lowered top down. plugged in stove tested. .burner. burner w.ork fine. reinstall hex head screws back top. pushback stove back into the wall. testes over again. all the stove work done.
Was this helpful?
Thank you for voting!
prior knobs were discolored and ugly
  • Barbara from Sun City West, AZ
  • Really Easy
  • Less than 15 mins
just purchased new knobs. The price was great, just took a little longer to receive then anticipated though.
Was this helpful?
Thank you for voting!
Old dishwasher rack and silverware rack
  • Anne Marie from Andover, MA
  • Really Easy
  • Less than 15 mins
The whole process was very easy! I just got the model number and bought a new rack and silverware holder on,one. There was no assembly needed so I just popped them in and replaced the old ones! Very easy to do!
Was this helpful?
Thank you for voting!
Orange light "Hot Stovetop" lense broke off.
  • John from Woodbridge, VA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven r emoved. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.
Was this helpful?
Thank you for voting!
Open door. Put racks in.
  • Harriet from Jacksonville Beach, FL
  • Really Easy
  • Less than 15 mins
nothing to it.
Was this helpful?
Thank you for voting!
broken handle on oven door
  • Lowell from Boulder, CO
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Used star screw driver to take door apart used socket set to unscrew handle screws. Installed new handle. Handle fit perfectly.
Was this helpful?
Thank you for voting!
clock, over control, oven light , timer did not work
  • Robert from Austin, AR
  • Really Easy
  • Less than 15 mins
  • Nutdriver
remove rear panel cover, removered four screws that held control panel, disconnected colored wires, removed circuit control board, reinstall new board and connected color coded wire to the correct spot on the board, plugged in 220 volt cord, switch on circuit breaker, everything worked normal again
Was this helpful?
Thank you for voting!
Open Switch
  • John from Denham Springs, LA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pull knob. Pull wires. Pull two screws. Replace switch
Was this helpful?
Thank you for voting!
Oven light wire broken, damaged socket
  • Patricia from Brandenburg, KY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.
Was this helpful?
Thank you for voting!
Heating Element Burned out
  • Rick from Tombstone, AZ
  • Really Easy
  • Less than 15 mins
  • Nutdriver
The task was very easy. After recieving the replacement I removed 2 small hex head screws using a nut driver. I pulled the slip on connectors apart the reversed the steps. I was done and able to use the oven in less than minutes.
Was this helpful?
Thank you for voting!
I needed an oven with three racks, mine came with two.
  • BETTY from CYPRESS, TX
  • Easy
  • Less than 15 mins
just slipped it in
Was this helpful?
Thank you for voting!
Plastic glide broke
  • Mary Ann from Granby, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.
Was this helpful?
Thank you for voting!
no racks to oven
  • Johnette from Baltimore, MD
  • Really Easy
  • Less than 15 mins
Easily glide in.
Was this helpful?
Thank you for voting!
Missing oven rack
  • Damaris from Easton, PA
  • Really Easy
  • Less than 15 mins
I opened oven and pushed oven rack inside.
Was this helpful?
Thank you for voting!
Bad control board
  • Daryl from Savannah, TN
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Removed top back plate of oven. unpluged all of the wiring plugs on the control board. Removed two screws on the control board. Removed face plate from old control board and put it on the new control board. Atteched new board with the two screws. Connected all of the plugs to new board ( all plugs are color coded to board). Re-installed o ven back plate. Pluged oven in. Works great.
Was this helpful?
Thank you for voting!
All Instructions for the JCBP66DP1WW
121 - 135 of 161