EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCB635DF1WW General Electric Range - Instructions

All Instructions for the JCB635DF1WW
106 - 120 of 167

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element buned and broken
  • Charles from Pittsburgh, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
The repair was somewhat easy. The replacement elements are pushon type. The only thing is that the G.E. Hotpoint wire on the right side of the bake element is short. Be extra careful to not have it go back into the back oven wall or you will have to take the back cover plate (Pull out the range, remove the back cover using a nut driver or a magnetic tip srewdriver with the bit removed works[Wires are right there]. This is as easy a job as can be.
Was this helpful?
Thank you for voting!
element burnt out
  • don from protection, KS
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
ordered part shut electricity off took out 2 screws took of connectors put in new element replaced connectors replaced screws turn on elec started cooking
Was this helpful?
Thank you for voting!
Bad Burner
  • Roosevelt from Waggaman, LA
  • Really Easy
  • 15 - 30 mins
I simply removed the 2 anchor screws in front of the stove and wrote down the wiring order on the instillation diagram, removed the old burner, removed the two studs, made sure they were installed on the right numbers place them in the new burner, wired the new burner, placed the springs respectively. Placed them in the correct holes in the frame to be sure that the burner was aligned properly. Put the washers on the studs and replaced the frame screws, lowered the cook top and returned the screws to lock the cook top in place.
Was this helpful?
Thank you for voting!
Drawer glider broke about a year ago.
  • loma from Neah Bay, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers
My wife could open and close the drawer without too much difficulty, but occasionally, it would not close properly and she would have to empty the contents do could alaign it properly to close. The last time she was talking about buying a whole new drawer. I asked her what the part looked like, as I never to fight with it. I went online a nd found the part for $1.16 plus shipping at $8 plus. It was well worth the time and effort, and I now have a happy wife. Paul Parker
Was this helpful?
Thank you for voting!
Oven would not reach bake temp.
  • Thomas from Rogersville, TN
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Used the TS guide, because I had no idea what the problem was. That was easy step by step. Thanks. Gave me a list of two parts that could fix the problem. Picked the higher percentage part (97%). Followed the simple install instructions and it was successful. One problem I did encounter was the two wires that it connected to were short. R emoved the back center plate to gain access to the wires. I was able to extend them enough to make the connections to the bake element. If not for that the repair would have only taken maybe 10 minute's.
Was this helpful?
Thank you for voting!
Replacment of burner control switches
  • Judith from Keezletown, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I watched your video on the subject and followed it exactly. It explained everything I needed to know. The hardest part was CLEANING under the stove once I pulled it out from the wall!
Was this helpful?
Thank you for voting!
Bake Element Broke
  • Lesley from LaPlace, LA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
followed the instruction from your video an it was a snap
Was this helpful?
Thank you for voting!
Open Switch
  • John from Denham Springs, LA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pull knob. Pull wires. Pull two screws. Replace switch
Was this helpful?
Thank you for voting!
Broken bake element
  • Marcus from Lagrange, GA
  • Really Easy
  • Less than 15 mins
  • Pliers
Very easy to install save several dollars
Was this helpful?
Thank you for voting!
Bake Element burnt out
  • Greg from Chicopee, MA
  • Really Easy
  • Less than 15 mins
  • Socket set
watched the video on part select - took less time then they said.
Was this helpful?
Thank you for voting!
lower burner quit working.
  • Robert from Rock Falls, IL
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
easy, less then 15 min. but take off door first makes alot easier. and don't forget to unplug, like i did. just a few sparks but no damage thank god.
Was this helpful?
Thank you for voting!
Plastic glide broke
  • Mary Ann from Granby, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.
Was this helpful?
Thank you for voting!
Broiler Element Replacement
  • Emily from Snoqualmie Pass, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
There were two small screws at the back of the stove (this was the part that intimidated me. At first glance it doesn't look like it should be removed). But you just have to unscrew them, disconnect the wires behind them (this part can be done by hand), and pull the element out. The new element slides right in! Just make sure the power to the stove is disconnected either by breaker or by unplugging it. I'm not sure if it matters, but I made sure to connect the wires to the same side of the element that they were removed from.
Was this helpful?
Thank you for voting!
Heating element not working
  • Stuart from Yelm, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Saw the brief video and as stated took less than five minutes to replace. It took longer to clean up the floor under the oven than to replace heating element.
Was this helpful?
Thank you for voting!
burned out
  • mary from morton, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
replaced
Was this helpful?
Thank you for voting!
All Instructions for the JCB635DF1WW
106 - 120 of 167