Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scratches in Surface
83 of 227 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
Changed air filter
6 of 7 peoplefound this instruction helpful.
Tom from LONGMONT, CO
Very Easy
Less than 15 mins
Very simple, easy, and quick! Anybody can do it!!
Was this helpful?
Thank you for voting!
air filter needed replacement
5 of 6 peoplefound this instruction helpful.
David from Dublin, NH
Very Easy
Less than 15 mins
pulled the top shelf and poped open the door and replaced the filter
Was this helpful?
Thank you for voting!
Recently replaced solenoid for ice maker / water dispenser. Then had problem with filter staying in place and not continually popping out.
1 personfound this instruction helpful.
JOHN from BAKERSFIELD, CA
A Bit Difficult
30 - 60 mins
Nutdriver, Screw drivers
Watched video of similar model repair for filter housing. But the model KitchenAide refrigerator requires enter and replacing housing from the back. My model has a metal facing which has doors attached to it also. It was simple repair though from the backside of the appliance.
Was this helpful?
Thank you for voting!
black scratchers from wheel chair
3 of 12 peoplefound this instruction helpful.
Linda from GLEN CARBON, IL
Very Easy
30 - 60 mins
shook bottle and painted waited a day and repeated
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read moreoring refer handles. Thank you
Read less
Was this helpful?
Thank you for voting!
Freezer temperature too cold
Robert from Boynton Beach, FL
Really Easy
Less than 15 mins
Nutdriver
Temperature in freezer too cold. Temperature display showed higher temperature than actual which caused the freezer to continually run. Thermister is found behind a white box on wall in freezer. Unscrew the box from wall and easily disconnect the thermistor clamp. Replace in reverse order.
My Orders
