EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS07PIY3 General Electric Range - Instructions

All Instructions for the JBS07PIY3
91 - 105 of 178

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I Ruined My Burner -- This Was A Solution For Me...
0 of 1 people found this instruction helpful.
  • DEBRA from DULUTH, MN
  • Really Easy
  • Less than 15 mins
I simply pushed the new burner into hardware. I then tested it to see if it works. . .
Was this helpful?
Thank you for voting!
Bake element went out in electric oven.
0 of 1 people found this instruction helpful.
  • james from pawnee, OK
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Socket set
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and unscrewed the the two screws that connected the wires and element together. I then tried to connect the new element to the wires, but found that the screw holes were smaller than the original holes in the old element and the o riginal screws wouldn't fit. No problem, I then got a cordless drill and found a drill bit a little bigger than the holes, I held the element connector with pliers and made the screw hole a little bigger, same with the other connector. I screwed the screws into the connectors with a socket wrench and then screwed the element back into the holes in the oven, then turned on the oven and it works as good as new.
Was this helpful?
Thank you for voting!
metal ends for connecting surface element to stove broke off in the outlet.
0 of 1 people found this instruction helpful.
  • Elaine from Framingham, MA
  • Really Easy
  • 15 - 30 mins
  • Pliers
disconnected electricity, used pinch pliers to remove broken ends from connection box and used an already existing element to make sure a new one would work at all. Ordered new one that arrived very quickly and replaced the broken one. After years of taking these in and out for cleaning by outside cleaning help they are bound to break off . I will do the gentle removal from now on.
Was this helpful?
Thank you for voting!
bake element had burned and started to arc
0 of 1 people found this instruction helpful.
  • steven from picayune, MS
  • Really Easy
  • 15 - 30 mins
  • Socket set
Removed oven door and racks. removed fan cover to expose elements two retaining screws.removed retaining screws and pulled burned element forward to expose electrical connectors.unconnected slide on connectors from old element and pushed leads onto new element and re-assembled.
Was this helpful?
Thank you for voting!
The control knob stem broke off when I moved the stove.
3 of 10 people found this instruction helpful.
  • Jonathan from Harvard, MA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I located and removed 2 sets of hex-head screws under the front lip of the cooktop, then lifted the entire cooktop to access the burner controls. Removed the wires and taped them, and took out the old control after removing 2 phillips head screws. Installed replacement part easily. Only tricky part is that the various shaft adapters do n't quite work with my knob. I'll fix it completely with a bit of epoxy and the adapters they sent.
Was this helpful?
Thank you for voting!
Heating element burnt in half
0 of 1 people found this instruction helpful.
  • Rebecca from McKinney, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
My Husband did the repair. It took him longer to prepare the appliance than it did to perform the actual replacement of the bake element! We LOVE the service and the selection found at PartSelect!! Our part arrived within 24 hours!We've recommended you to all our friends and co-workers. Bravo! Thank you again.
Was this helpful?
Thank you for voting!
Had to replace the baking element, which had burnt up.
0 of 1 people found this instruction helpful.
  • James from New Palestine, IN
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver
Removed the cover plate, pulled the element out, removed the screws holding the wires in place, but then I had to enlarge the screw holes on the new element in order to fit the screws into the new element. Took a while with an awl to enlarge ther two holes. Connected the new element, pushed it back in and replaced the cover plate. Work ed great.
Was this helpful?
Thank you for voting!
Old Bake Element was corroded, broke in two
0 of 1 people found this instruction helpful.
  • David from Champaign, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
First, used the nutdriver to remove the two screws that hold the element. Then pulled out the element 4 inches. Disconnected the two wires from the old element and discarded it. Connected the wires to the new element and tightened them a bit by squeezing with pliers (not too tight, but just enough so they won't disconnect easily). Pus hed the wires back through the insulation and screwed the two nuts back in place, making adjustments so that the element is level.

I had a great experience with part select. The part was easy to find and arrive within two days in perfect conditions. Everything went smoothly with the repair and the element is working very well.
Was this helpful?
Thank you for voting!
The old element blew up
0 of 1 people found this instruction helpful.
  • Douglas from Acampo, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed both racks, removed two screws holding element in. Removed two screws holding wires on element. Drilled holes in new element where the push-on connectors are attached so I could attach the oven wires to the new element. Attached the wires and screwed the element to the oven. Fit perfectly and the temperature of the oven matche s the control knob finally!

Thanks.
Was this helpful?
Thank you for voting!
needed new burners and drip pans
0 of 1 people found this instruction helpful.
  • Eula from Greenville, MI
  • Really Easy
  • Less than 15 mins
They fit perfect
Was this helpful?
Thank you for voting!
bake element did not heat
0 of 1 people found this instruction helpful.
  • Patti from Carnation, WA
  • Really Easy
  • Less than 15 mins
  • Socket set
shut off power, removed self tapping nuts, removed element, put new element in, re-attached nuts.
Was this helpful?
Thank you for voting!
burned-out six inch electric stove- top burner
0 of 1 people found this instruction helpful.
  • Harold from Gloversville, NY
  • Really Easy
  • Less than 15 mins
Removed the old and slipped in the new.No problem and it works fine.
Was this helpful?
Thank you for voting!
Electric stove 8" burner needed to be replaced
0 of 1 people found this instruction helpful.
  • LISA from GLENDALE, CA
  • Really Easy
  • Less than 15 mins
Installation took 30 seconds. Your website was easy to use & the part received was just as described. It arrived beautifully wrapped & in just a few days. ABSOLUTELY AWESOME!I will recommend your site to everyone.
Was this helpful?
Thank you for voting!
Burner heating coil element would not get hot.
0 of 1 people found this instruction helpful.
  • Jeannette from Haskell, NJ
  • Really Easy
  • Less than 15 mins
I pulled out the heating coil and pushed in the new coil. I turned the stove top on and heard a sound like "dzzzt". I immediately turned off the burner and waited for it to cool, then pulled it out. The part had a burn melt on one side of the end prong. It turns out that the part that the burner plugs into needs to be replaced. Actually, the stove top is over 20 years old and my landlord will have to replace the whole unit. So it turns out that I didn't need to order a surface element after all, but it was very easy to install!
Was this helpful?
Thank you for voting!
element broken at contact point
0 of 1 people found this instruction helpful.
  • MARLENE from EUGENE, OR
  • Really Easy
  • Less than 15 mins
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
Was this helpful?
Thank you for voting!
All Instructions for the JBS07PIY3
91 - 105 of 178