JBS07PIY3 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The small element blew out consequently shorting out the infinite switch.
3 of 7 people
found this instruction helpful.
-
Susan from Bend, OR
- Really Easy
- 15 - 30 mins
-
Screw drivers
The very first thing we did was turned the circuit breaker off and unplugged the range.
My husband removed the back panel and unplugged the switch. Drew a diaghram of the color coded wires. When we received the new one he broke the extension bar off to fit the knob, plugged it in and we were back in business. It was very easy for m ... Read more y husband as he is a mechanic (millwright). However, if you are mechanically inclined it is an easy fix.
My husband removed the back panel and unplugged the switch. Drew a diaghram of the color coded wires. When we received the new one he broke the extension bar off to fit the knob, plugged it in and we were back in business. It was very easy for m ... Read more y husband as he is a mechanic (millwright). However, if you are mechanically inclined it is an easy fix.
Read less
Was this helpful?
Thank you for voting!
drip ban needed replacing
1 person
found this instruction helpful.
-
Angelo from Phoenix, AZ
- Really Easy
- Less than 15 mins
removed heating element,removed old drip pan.added new drip pan,replaced heating element.Took less that 3 min.
Was this helpful?
Thank you for voting!
Old baking element burned into.
1 person
found this instruction helpful.
-
Casey from GOODING, ID
- Very Easy
- Less than 15 mins
-
Nutdriver
I unpluged stove then opened slightly oven door and lifted it off to get closer. Then with a light to help I took out two screws and pulled the element out. I didn't need pliers to get the wires that are put on with slide on clips. you may need a pair. put wires on slide in place put screws back ,replace door, plug it in and test. Very ea
... Read more
sy.
Read less
Was this helpful?
Thank you for voting!
Burned/scorched corroded drip bowl
1 person
found this instruction helpful.
-
Robert from Bar Harbor, ME
- Very Easy
- Less than 15 mins
No brainer. No tools. Remove burner, lift out old drip bowl, drop in new one, plug in burner, voila! Done. 10 seconds.
Was this helpful?
Thank you for voting!
a plug on the element broke off while cleaning and replacing
1 person
found this instruction helpful.
-
David from WEST WARWICK, RI
- Very Easy
- Less than 15 mins
Absolutely no tools required for this task. Simply align the prongs to the female portion on the stove top. Carefully push in until the element is in place then line up with the drip pan slot. No instructions are necessary!!
Was this helpful?
Thank you for voting!
Shorted out the burner... fat gets into the receptors on these old stoves.
1 person
found this instruction helpful.
-
Todd from Mountain View, CA
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
The only hard part about putting in a new terminal block (and this time I had to replace the burner too, because that fried too) is stripping the stove wires, because that thermal insulation is very hard to get off. Otherwise, it's simple. In this case, I had already replaced this one (sigh), so had already cut & stripped the wires, so
... Read more
it was all easy. Frankly, the sane thing to do is buy a new stove, but wife is too cheap.
Read less
Was this helpful?
Thank you for voting!
rusted out drip pan
1 person
found this instruction helpful.
-
Brenda L from Naples, NY
- Really Easy
- Less than 15 mins
unplugged the element took the old pan out and put the new one in, plugged the element back in.
Was this helpful?
Thank you for voting!
the burner trays just needed replaced for an 85 year old senior citizen
1 person
found this instruction helpful.
-
Bet from Bothell, WA
- Easy
- Less than 15 mins
Removed burner trays, pulled out heater unit, cleaned up inside of area around all four burners, slipped the burner trays back in and pushed the heater unit back into place.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner worked intermittently
1 person
found this instruction helpful.
-
Mike from Rowlett, TX
- Really Easy
- Less than 15 mins
Lined up the prongs and slid it right in, took 30 seconds.
Was this helpful?
Thank you for voting!
Old bake element was burnt out.
1 person
found this instruction helpful.
-
Jason from Cincinnati, OH
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Flipped off the breaker for the stove. There were two screws holding the old element in place. Removed those, pulled the element out a little to expose two wires, disconnected those, swapped in the new element, reconnected the wires, and screwed it back into place. Flipped the breaker back on and voila! Barely more difficult than changing
... Read more
a lightbulb.
Read less
Was this helpful?
Thank you for voting!
The bake element stopped working in my oven
1 person
found this instruction helpful.
-
Amy from Grand Island, NE
- Really Easy
- Less than 15 mins
-
Screw drivers
This was extremely easy! I unscrewed two screws, pulled out the old element, inserted the new element and screwed the screws back in. Also, this part came very quickly through the mail. If needed, I will definitely use this site for repairs again.
Was this helpful?
Thank you for voting!
old wore out parts
1 person
found this instruction helpful.
-
Bobby from Trinity, TX
- Really Easy
- Less than 15 mins
just put in the new part
Other Parts Used:
Was this helpful?
Thank you for voting!
When moving the range, the 220 wire popped off the terminal and arced melting the plastic terminal
1 person
found this instruction helpful.
-
Randall from ST PETERSBURG, FL
- Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
I looked for a new terminal locally, but no one had s terminal that would fit a 40-year old range. I went on line to PartSelect and could not find my model range, so I looked through all the terminals listed on the website (about 500) but found only one that was close to mine. Mounting holes did not match, but it had 3 connectors with 2
... Read more
20 capability, so I ordered it. I requested express shipping by UPS and thought I paid for the extra charge. When I got notification of shipment. I saw it was via ground. It went from Louisville to Jacksonville to Clearwater, FL. I ordered it on Thursday night and received it the following Tuesday night. Meanwhile, we had no stove to cook on. When the part came, it took two days to get the contractor back to our condo. He drilled new holes on the mounting box and jerry-rigged the wiring to make it fit. The range is now working, but I was disappointed in the delay in shipping which I agreed to express shipping.
Read less
Was this helpful?
Thank you for voting!
replaced the drip bowls
1 of 2 people
found this instruction helpful.
-
Barbara A from Riverhead, NY
- Really Easy
- Less than 15 mins
I am not going into a description. It is a very minor thing to do. I did appreciate the quick delivery of the parts and will purchase future appliance parts from you again.
Other Parts Used:
Was this helpful?
Thank you for voting!
8" stove element stopped working
1 of 2 people
found this instruction helpful.
-
Michael from Standish, ME
- Really Easy
- Less than 15 mins
Everything was very easy: identifying the right part was very easy on the website, the part came quicker than I expected, and my wife replaced the stove element before I even got home from work. She just pulled the old one out like she would to clean the top of the stove, and put the new one back in. Have had several awesome cups of co
... Read more
ffee since the replacement.
Read less
Was this helpful?
Thank you for voting!