EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS034N1 General Electric Range - Instructions

All Instructions for the JBS034N1
31 - 45 of 355

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
element went out on oven
1 person found this instruction helpful.
  • Brian from Deer Park, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Made sure oven was turned off. I used nut driver to remove nuts holding old element to back of oven. gently pulled element out of wall, taking care not to yank because of wires attached to back of element. Made sure oven was off again and then used nut driver to carefully remove wire leads from receptors on element. removed old elemen t from oven and got the new element. carefully used nut driver to attach wire leads to new element. When snugging the bolts to leads, used pliers to keep leads on the element from bending. carefully replaced wires and rear of element into the space behind oven, and used nut driver to attach the back of element to the back of oven. shut oven and turned on to make sure it worked. it did. I was very pleased with my experience with part select dot com, and will be buying another element soon to replace the one in my other oven! Thank you
Was this helpful?
Thank you for voting!
No heat on bake.
1 person found this instruction helpful.
  • Marian from Inglis, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
The first thing I did wrong was order the wrong part. Then later I did find the Model number on the side of the bottom drawer. I reordered the right part and turned off the electrical breaker. Removed the old element. I then installed the element in the oven with 2 screw nuts and pulled out the stove, took off the back panel and slipped the wire nuts onto the element. Very simple. I am really thankful there is a place to order the part and it came the next day after I ordered it. WHOW!
Was this helpful?
Thank you for voting!
Lower baking element had burned out.
1 person found this instruction helpful.
  • Rob from Las Cruces, NM
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Using a nut driver, I removed the two screws holding the baking element to the firewall of the oven. I then pulled the baking element out exposing the two wires connected to it. I then used the same nutdriver to remove the nuts and detached the old element. I then connected the new element to the wires, pushed the wires inside the firewal l and reattached the element to the firewall of the oven.
The time it took was literally a few minutes. Works like a new oven!
Was this helpful?
Thank you for voting!
Baking element had burned out and actually cracked in half.
1 person found this instruction helpful.
  • Marie from Roxboro, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
It was so simple, I turned off the breker to the oven, unscrewed two screws holding in the element, pulled out until the wire connetion was exposed. I unscrewed those two screws, then placed the replacement part, put the two screws on, pushed back the wiring and insulation.Final step was screwing two screws to hold the unit to the oven ba ck. So simple! The part was ordered regular mail and still was here in 2 days. Will recommend to friends for sure!
Was this helpful?
Thank you for voting!
Replacing the bake element
1 person found this instruction helpful.
  • Ken from Lexington, KY
  • Really Easy
  • Less than 15 mins
  • Pliers
I couldn't find the oven model number so I just looked at the shapes from partselect.com. This would have been fine except I didn't know my Kenmore model had 4" leads so the one I ordered were only 2". I had to return the first element but the process to do this was FAST and EASY. With help I found the model number and had the correct par t shipped. It took less than 5 minutes to install. It took longer to mop and clean behind the oven that hadn't seen the light of day in 10 years.
Was this helpful?
Thank you for voting!
The Bake Element broke and when powered on it started to spark and flame.
1 person found this instruction helpful.
  • Phillip from Cary, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
First I read the already posted repair stories to give me confidence I could perform the repair.
Followed their steps -
Removed the two screws holding the plate to the oven.
Pulled out the element.
Removed the two screws holding the wires to the element.
Installed the new element by attaching the two screws (which were supplied) to the element.
Reinstalled the plate to the oven.
Tested it and it worked perfectly saving a costly service call.
Was this helpful?
Thank you for voting!
The lower heating elemen went out. It looked like a welding rod
1 person found this instruction helpful.
  • Scott from Tekoa, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
It was so easy. Just removed the cover and then unscrewed the wires (keep track of which wires go to which side). Do teh reverse to reinstall
Was this helpful?
Thank you for voting!
Oven wouldn't heat, bake element burned out.
1 person found this instruction helpful.
  • Russ from Chimacum, WA
  • Really Easy
  • Less than 15 mins
  • Socket set
Repair was as easy as one, two three. Turned off the power and removed the two screws holding the element in place. Then pulled the element out approx. 3 inches and removed the two screws connecting the wires to the element.

From there I reversed the process and the repair was complete in less then 5 minutes, and I am not a el ectrician.
Was this helpful?
Thank you for voting!
Original element stopped working
1 person found this instruction helpful.
  • Brian from Clayton, DE
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...I copy and pasted this from their example - it really is that easy - this is a simple repair.
Was this helpful?
Thank you for voting!
Element was cut
1 person found this instruction helpful.
  • Rosaire from St. Agatha,, ME
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed two screws and take Element out and put new one in.It is very easy to do.
Was this helpful?
Thank you for voting!
Lower (bake) element burned out
1 person found this instruction helpful.
  • gary from Broken Arrow, OK
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Two 1/4" srews to remove the element from its mount, two 1/4" screws to remove wires and then the reverse to install new unit. Delivery was super fast and the price was half the price of the local dealers. I will certainly be a repeat customer.
Gary T.
Was this helpful?
Thank you for voting!
lower heating element wasn't working
1 person found this instruction helpful.
  • Kelli from Moyock, NC
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
I turned off the electricity, unscrewed the old one and disconnected the electric wires, then put the new one in just like the old one. It was very easy and now it works great.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Mark from North Richland Hills, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I removed the oven door and racks. After turning off the power I raised the old element up to be able to access the screws. I undid the two that connected the element to the back of the oven. After pulling the element forward, I undid the two screws that supplied power. I reconnected everything and, after turning the power back on, te sted the element. It worked perfectly. It has been used quite extensively since then with no problems.
Was this helpful?
Thank you for voting!
Replacing a burned out oven heating element
1 person found this instruction helpful.
  • Thomas from Worthington, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed two hex nuts holding the element's faceplate to the back of the oven and pulled the entire element straight toward me a couple of inches, pulling the element's ends and connections into view. I unscrewed the two screws holding the element ends to their connections, connected the new element, pushed it back in place, and s crewed the faceplate tight again. The most challenging part of the whole process was finding the part number for the GE oven (it's on the frame of the storage drawer underneath the stove).
Was this helpful?
Thank you for voting!
Bake unit had burned out.
1 person found this instruction helpful.
  • Rita from Apopka, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
My husband removed the two screws that hold the element in place. He then pulled the element out about 3 inches and disconnected the two wires. He then removed the old bake unit and replaced it with the new one. He reattached the wires and pushed the element into place. Then he put the two screws back in that hold the element in place .
Was this helpful?
Thank you for voting!
All Instructions for the JBS034N1
31 - 45 of 355