J795E1 General Electric Range - Parts

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All...Read more you need for this simple repair is small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.

This kit includes an 8", three wire, 2450W surface element. This low rise element has an attached trim ring, and a terminal block with all three-wire units.

This 6-inch high-rise heating element offers fast and even heat for electric ranges. Ideal for a variety of cooking needs, it features a raised coil design that improves heat distribution. Installation is simple and requires no special tools. The element has a durable build and a neutral metallic finish.

The length of this thermostat's capillary is 62 inches.