J35002 General Electric Range - Instructions

Sarah from San Andreas, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

dirty drip pans and rings in new house i bought

could not find the proper pans and rings in any diy stores, as stove is so old. went on this site and there they were!!!

Parts Used:

patricia from richland, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

pre 1992 6" plug in electric cooking elements- rusted out

Worked, don't have to replace an old GE combination range "Microwave Cooking Center" when the surface units rusted out.

Parts Used:

Surface Element - 6" - 1325W

Ella from Tampa, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

I needed new Drip Pans

I purchased a set of drip pans at the store only to find out that they were not for GE Ranges. I got on line and inquired and your representative was very helpful. The repair was easy. After cleaning the stove I removed the old drip pans and installed them one by one. No problem!

Parts Used:

Gloria from San Jose, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The burner stoped working

unskewed the screw. Very basic

Parts Used:

8 Inch Surface Burner

alvin from jamaica, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

replace a burned out calrod unit

Simply unplugged the burned out one and plugged in the new one. It worked like a charm.

Parts Used:

Surface Element - 6" - 1325W

Albert R from Richmond, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Condo Had Very Old Drop In. Threw Away Drip Pans And Rings

Placed new ones on range. Exactly what I would do to wash them.

Parts Used:

Valerie from Ogden, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broiler Element Burned Out

The repair was very eash. The replacement element fit perfectly and only involved removing two screws, pulling the old element out far enought from the bak of the oven to disconnect the wires held by two screws . Disconnecting the two wires and installing the new element. This is a 25 year old appliance and is back to working like new. One note, be sure to shut the power off to the range because one of the wires connected to the element remains HOT! even if the oven is not on.

Parts Used:

Broil Element

Robert from Mission Viejo, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set

Was this instruction helpful to you?

Threw away old parts!

Put bowl in and then slid rings around. Just like cleaning procedure. Easy. Thanks for your service.

Parts Used:

Valerie from Ogden, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Missing burner element

I bought the replacement element for my 98-year-old aunt, and she installed it.

Parts Used:

Surface Element - 6" - 1325W

Kenneth from Corpus Christi, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

dirty drip pans and rim trims

Threw away the old ones after lifting burner rings. Put new parts in place.

Parts Used:

Anna from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

old stained drip bowls

I tried first to replace them, with a set I bought at a local hardware store. But they were too small. So I went on the internet, and found Part Select, and thanks to a very helpful guy, who made the extra effort to find the exact drip bowls, I now have a nice, shiny stove-top again. Installing them took two minutes... tilt the burners up, and slide them in. No problem.

Parts Used:

Peter J from Oceanside, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broiler Element burned out

From inside the oven after turning off the breaker I removed all of the mounting screws with a nutdriver, I removed the wire screws after taping all of the wires together with a small piece of tape to prevent them from falling back into the opening. I installed the wires with the original screws as the provided screws would not fit the holes, tightened them, removed the tape and placed the element back into the opening. I then tightened the hanging brackets, after getting them to align and then tightened the rear mounting bracket. It did help to adjust the baking rack down and leave the baking rack in place to have a place to rest my arms. The install then became a piece of cake!

Parts Used:

Broil Element

Chuck from Ellettsville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

replace burner, drip bowl and ring

This was a second hand stove we have had for about 3-yrs. I noticed immediatley that the drip bowls and rings were not OEM parts & the bottom of the burners had actually been bent to fit the rings. I was very glad to find this website with a detailed diagram of the stove and parts. I intend to replace all the burners, drip bowl & rings, and then start replacing other parts as needed.

Parts Used:

8 Inch Surface Burner

cheryn from lynchburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

dirty drip pans

My stove top is 35 yr old. & Lowes did not have drip pans that fit. these worked great & easier than cleaning the old ones. They just popped right in.

Parts Used: