IP41002 Inglis Washer - Parts

If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Rubber washers are tasked with enhancing the seal between the hose and washer. A faulty or damaged washer will not be able to perform this pro...Read moreperly, and water will be able to leak from the poor connection. This OEM part is sold individually, so make sure you order the quantity that is needed. The washer measures 1 1/16 inches x 5/8 inches.

This part gets the motor up to speed quickly before transferring power to the run capacitor.

Sold Individually.

This spin tube T-Bearing is an inch long. Sold individually.

This two piece oil seal kit comes in two pieces and is used for the gearcase input shaft of your washer.

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original. The hose clamp is about 2 inches in diameter and made of stainless steel. A hose clamp generally attaches hoses and tubes to various equipment This part consists of a band and a screw that tightens along the slot...Read mores when it is turned. This part works with washers, dishwashers, food waste disposers, and ice makers. This will need to be replaced if you notice leaking coming from the appliance.

This clamp helps to prevent leaking by holding the end of water hose in place.

Sold Individually. Used to help stabilize the appliance on uneven surfaces.

Sold individually.

This part rotates back and forth to move the clothes around during the wash cycle.

The neutral drain kit prevents the basket from spinning during the drain cycle.