I5221 Snapper Snow Blower - Parts

Designed to fit inside the lock nut so both parts can be tightened, this Flat Head Carriage Bolt is not part of a kit or assembly and is sold individually. It is approximately 1/2 an inch long, made of metal, is silver, and is used for various applications on a variety of equipment. This part will need to be replaced if the threads are ...Read morestripped or worn, or if it no longer can hold the parts together tightly. You will need a wrench or socket set and a torque wrench to complete this repair. Customers rate this repair as Easy.

It is an authentic OEM sourced item which is specially produced for use with Snapper snowblowers. The discharge chute deflector is made of a durable material. A socket set might be necessary during the installation of this part. It may become broken and will need to be replaced. This item is available as an individual replacement part.

This is a genuine manufacturer-approved part which is specially designed for use with Murray and Snapper snowthrowers. It is an identical replacement for a missing or a faulty bushing that was installed on a new unit. The purpose of this bushing is to allow the shaft to rotate with minimum friction, please make sure to refer to the approp...Read moreriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. S...Read moreymptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

Designed for use with lawn and garden equipment, this manufacturer-approved component is an identical replacement for an idler in a variety of models. This part is not part of a kit or assembly. It is sold individually. The idler is made of metal, is white in color, roughly 2.75 inches in diameter, and is used to drive the unit as well as...Read more support the belt. This part needs to be replaced when it is worn or damaged, which will occur through regular use. When the part is malfunctioning, you will lose drive control in your machine. This part is located usually located on the idler arm. Please refer to your owner's manual for the exact location on your model. You will need a wrench set or socket set to complete this repair. Customers rated this repair as medium difficulty.

Gear worm

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This genuine manufacturer-sourced part is specially made for use with belt used on Snapper snowthrowers. This is the main belt that rotates the blower, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Make sure to check the diagrams of your model for the correct location and applicatio...Read moren of this component. Keep in mind this high-quality belt is made of durable rubber and is sold individually.

It is an authentic manufacturer-sourced component which is specially designed for use with Snapper and Simplicity snowthrowers. The purpose of this bushing is to help to secure the axle shaft allowing it to rotate with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement. This part is...Read more made of high-quality metal and is sold individually. Check the owner's manual and the diagrams for your model to ensure the correct replacement procedure. A wrench set will be needed to perform this repair.

This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The o-ring is used to seal the connection between the two halves of the gearcase cover. This o-ring is available as an individual replacement part, please see illustrated part list for associative parts.