- Home
- HTZ18JAAWW
- Instructions
HTZ18JAAWW Haier Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
This refrigerator had pawer( lite was on) but nothing turning--motor or fan. Turned control temperature min-max - no cange.
49 of 112 people
found this instruction helpful.
-
HAE-YOUNG from Douglaston, NY
- Easy
- 1- 2 hours
-
Screw drivers
Found burned Defrost timer contacts.
Was this helpful?
Thank you for voting!
freezer compartment worked fine but very little cooling going to refrigerator section.
3 of 3 people
found this instruction helpful.
-
Lee from OZARK, AR
- Really Easy
- 30 - 60 mins
-
Screw drivers
Freezer worked great but no cooling to refrigerator section. Replaced with part ordered. Phillips head screw driver is all that is needed. Very easy to replace, it's plug and play. New part powered up neither the freezer nor the refrigerator. Went back to old part and atleast freezer still works. New part was no good from factory. The re
... Read more
placement part# matched the original. I attempted to contact PartsSelect but there was no response back.
Read less
Was this helpful?
Thank you for voting!
Door Gasket was done for.... leaked and did not seal.
-
Bob from Phoenix, AZ
- Really Easy
- Less than 15 mins
Pulled out the old gasket and pushed in the new one.. easy as could be.... I have done other gaskets and they seem to be very critical as to alignment many screws etc... this was the way it should have been...One note... when I opened the box with the lable "freezer" the gasket inside was huge...A little panic.... I opened the " refrigera
... Read more
tor" box and was pleasantly surprised to find the correct gasket for the freezer.... mis boxing at the factory ??? lucky I had ordered both gaskets for this unit.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!