HTX24GASK0WW Hotpoint Dryer - Parts

This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley, allowing all the parts to work together, spinning the drum as the motor rotates. If the drum will not turn...Read more when the dryer is turned on the belt is likely broken. It is common for belts to stretch or become brittle over time, which is what leads to the breakage. If broken, it should be replaced; the drum simply cannot spin without this belt. Refer to your model number and user manual to check if this part is right for you. Ensure you use work gloves to protect your hands from sharp internal parts during this repair. Please note: When comparing the length of your old belt to the length of the belt as stated here, remember that a small amount of stretching and contortion may occur with belts over time for a range of different reasons. Unless your belt is drastically different in length, this belt is what you are looking for despite any small inaccuracies. You will need to remove power to your appliance, remove the main panel, and access the motor drive to slip your new belt back into place.

This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromised. Disconnect power to the dryer before completing this repair. You will need to remove the front of the dryer to gain access to the felt s...Read moreeal. This felt seal may differ in appearance from your original but will function the same as your original. This is an OEM replacement part that is sourced directly from the authentic manufacturer.

This lint filter is a genuine OEM component designed for use in both electric and gas clothes dryers. It plays a critical role in maintaining proper airflow by capturing lint and debris during drying cycles, helping prevent duct obstructions and reducing fire risk. Regular cleaning is essential to ensure efficient operation and faster dry...Read moreing times. If the filter’s screen is torn, the casing is cracked, or drying performance has declined, replacement is recommended. Installation is simple and tool-free—just remove the old filter as you would for cleaning, and insert the new one into the designated slot. This part is sold individually and is compatible with a wide range of dryer models.

This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and dry your clothes thoroughly and evenly. It keeps the drum stable and protects it from excessive friction damage. Over time, the bearing may...Read more wear down or break due to normal aging or wear from repeated use. If the bearing is no longer able to support the drum, you will likely notice unusually loud grinding or squeaking noises from the dryer. You may also notice increased drying times due to poor drum rotation. Inspect all the bearings on your dryer, as they tend to wear down at the same time. Each drum glide bearing is sold individually.

This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums will scrape against metal during the drying cycle which will produce a squealing, or scraping sound.

Restore reliable operation to your GE dryer with this genuine OEM push-to-start switch, designed specifically for use with a range of GE dryer models. This switch activates the dryer when you press and release the button, making it an essential component for proper startup. Common signs that this part may need replacement include the dry...Read moreer failing to start or starting unexpectedly without pressing the switch. Replacing the switch is a straightforward repair and requires only a Phillips screwdriver and a flathead screwdriver. Before beginning the installation, always disconnect the power to ensure safety. Once the power is off, remove the control panel screws, disconnect the old switch, and install the new one in its place. This part is sold individually and is a reliable solution for restoring your dryer's functionality with minimal effort.

This rear drum bearing sleeve is a critical support component located at the back of the dryer drum, designed to reduce friction and ensure smooth rotation during operation. As the drum spins, the sleeve helps maintain alignment and stability, contributing to efficient drying and quiet performance. A worn or damaged sleeve can lead to sym...Read moreptoms such as squeaking, grinding noises, excessive drum movement, or heat loss. This genuine OEM replacement is compatible with select GE and Hotpoint models and restores proper drum support. Installation typically involves accessing the rear panel, removing the drum, and replacing the sleeve to restore optimal function.

This authentic OEM rear bearing O-ring is designed for use with GE dryers. It helps secure the drum rear bearing onto the drum shaft, playing a key role in maintaining smooth and quiet dryer operation. A common sign that this part may need replacement is increased noise during the drying cycle. This O-ring is sold individually. To replac...Read moree the O-ring, you’ll need a Phillips screwdriver, a square-head screwdriver, a small flat-blade screwdriver, and needle-nose pliers. Always consult your dryer’s manual or parts diagram to ensure proper installation and compatibility.

This is 39 inches long.

Experience the seamless functionality of your dryer with the GE Door Hinge. This dryer component plays a crucial role in the operation of your machine, supporting the dryer door on its front panel. It vividly ensures the door's pivot opening and closing motion is not disrupted, hence offering an unproblematic laundry experience. Expedite ...Read moreyour device's repairing process with this part and to ensure safety, it's recommended to wear work gloves during the installation process. This door hinge, carefully crafted by GE, takes into account precision, durability, and above all, your dryer's optimal performance. Bring home this essential piece today to maintain your appliance's performance.

This genuine OEM control knob is used in dryers. It is mounted on the front panel of the appliance. It is white in color and is made from high quality plastic. It allows users to select various drying cycles, such as regular, delicate, or timed drying, as well as adjust temperature settings and other options. A faulty knob will result in ...Read moredifficulties such the knob not turning smoothly or accurately selecting the desired setting, or the dryer not responding to changes in the selected settings. Additionally, if the knob feels loose or wobbly, it may indicate that the knob is damaged or worn out. You will need to be replace the knob to restore proper functionality to the dryer.

This dryer door latch is designed to securely fasten the door to the cabinet, ensuring safe and reliable operation during each cycle. Made from durable gray materials, it engages with the door strike to keep the door closed and forms part of the dryer's safety interlock system, which prevents the appliance from starting if the door is not...Read more properly latched. A faulty latch may result in the door popping open, the dryer failing to start, or visible damage such as cracks or wear. Replacing the latch restores secure closure and helps maintain safe, efficient drying performance. Installation is straightforward and typically requires minimal tools.