- Home
- HTN16ABX4RWW
- Instructions
HTN16ABX4RWW Hotpoint Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noisy evaporator fan motor
5 of 5 people
found this instruction helpful.
-
Greg from HADDON HGTS, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed old replaced with new part. Easy Peasy
Other Parts Used:
Was this helpful?
Thank you for voting!
NOISY
5 of 5 people
found this instruction helpful.
-
Paul from NANTUCKET, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
I FOLLOWED YOUR VIDEO............WAS EASY. THANKS
Other Parts Used:
Was this helpful?
Thank you for voting!
refrigerator evaporator fan noise
6 of 9 people
found this instruction helpful.
-
Alan from Sunapee, NH
- Easy
- 15 - 30 mins
-
Screw drivers
Despite attempts to quiet the 2 year old fan, I went ahead and replaced it. Part Select was prompt with a new one at my door less than 24 hours. It was just the fan motor, so took a couple extra steps to place it in the metal housing, but no problems and though the frig still makes noises, it's not coming from the fan as before.
Was this helpful?
Thank you for voting!
Frig too warm
5 of 6 people
found this instruction helpful.
-
Judith from Port Mansfield, TX
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Followed the instructions on the repair video and it made very easy. Also saved us a lot of money. Thanks for your help.
Was this helpful?
Thank you for voting!
cracked shelf
4 of 4 people
found this instruction helpful.
-
ken from little ferry, NJ
- Really Easy
- Less than 15 mins
Shelf cracked when less than year old. and has gotten progressively worse thru the years.
Replaced in seconds , no tools required .
I should have done this years ago
Replaced in seconds , no tools required .
I should have done this years ago
Was this helpful?
Thank you for voting!
The refrigerator would not stop running, resulting in frozen food in the refrigerator compartment.
4 of 4 people
found this instruction helpful.
-
George from W MELBOURNE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
After reading the trouble shooting section of the owners manual, I determined, without much difficulty, that the temp control was defective. I checked some local outlets and found the prices running from $36.00 and up. The same part from this site was around $20.00. Guess where I bought mine! It arrived in a timely fashion, and I inst
... Read more
alled it with no problem, in about 10 - 15 minutes. This was a very easy job, just remove and replace three wires snap the unit into place, and screw the cover on. Tip: I always use you tube or another source to get some instruction, just in case I'm not as smart as I think I am!
Read less
Was this helpful?
Thank you for voting!
Freezer door gasket was not sealing
4 of 4 people
found this instruction helpful.
-
Reginald from VERO BEACH, FL
- Really Easy
- Less than 15 mins
Went on YouTube and it had excellent instructions for removal and installation
Was this helpful?
Thank you for voting!
missing a shelf
6 of 10 people
found this instruction helpful.
-
Joseph from Rome, NY
- Really Easy
- Less than 15 mins
My repair was simple. Just put the shelf in the holes in the freezer. The AMAZING thing was how quickly I recieved the part after placing my order. I placed the order at about 3:30 pm on a friday checked the box for ground shipping and the part was at my door the next morning. I think that was a mistake, but I was impressed.
Was this helpful?
Thank you for voting!
EVAP fan motor wore out, fan hits flange in back panel
5 of 7 people
found this instruction helpful.
-
James from Okeechobee, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
Took back out of freezer compartment, pulled plug and removed old motor, inserted new parts. It was
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.
Other Parts Used:
Was this helpful?
Thank you for voting!
top freezer working, bottom section of the fridge not cooling
6 of 10 people
found this instruction helpful.
-
Michael from Jamaica, NY
- Easy
- 15 - 30 mins
-
Screw drivers
First I removed the two screws, the fan and unpluged the electrical connection. Then, plugged in the new part and then screw it back together.
Was this helpful?
Thank you for voting!
Howling motor
4 of 4 people
found this instruction helpful.
-
Gregg from COEUR D ALENE, ID
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver
Open freezer, remove rack....this got a little complicated because I had to remove the door, that required the offset screwdriver because I had a clearance issues preventing the door from opening all the way. Remove the panel covering the fan, unplug the fan, remove it from bracket, install new fan, plug in, replace panel, replace rack, r
... Read more
eplace door...bam all done!
Read less
Was this helpful?
Thank you for voting!
Refrigerator light wouldn't come on.
4 of 5 people
found this instruction helpful.
-
Daniel from Crown Point, IN
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
After replacing the light bulb and still no light I manually pushed the light switch button. Intermittently the light would come on then go out. I removed the power plug from the power source then replaced the light switch. I plugged the refrigerator back in and now I open the door the light comes on and stays on until the door is closed.
Was this helpful?
Thank you for voting!
Difficulty in removing the old switch
5 of 8 people
found this instruction helpful.
-
James from Federal Way, AL
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
The old switch was hard to remove. Thinking that I may have to loosen the wires I used a socket wrench to remove a clamp. This was unnecessary. In the end the switch did come out using a large size screwdriver. The problem was that the expanding plastic tongue is not visible from the ouside so you have to try to feel your way around.
... Read more
If i had ordered the replacement before and not afterwards I would have seen this before hand.
Read less
Was this helpful?
Thank you for voting!
Pan cover cracked
4 of 5 people
found this instruction helpful.
-
Jon from Iola, WI
- Really Easy
- Less than 15 mins
My wife had the cover changed before I got home from work. Perfect fit for a replacement part!
Was this helpful?
Thank you for voting!
vegetable vegetable pan lid was cracked and I wanted another wire shelf.
4 of 5 people
found this instruction helpful.
-
Debra from West Lafayette, IN
- Really Easy
- Less than 15 mins
The parts came the next day after ordering and I didn't pay for fast shipping. I removed the drawers and the old lid-shelf and replaced it with the new one; also added an extra shelf. I love the new items and they fit perfectly.
Other Parts Used:
Was this helpful?
Thank you for voting!