HT3810SA Honda Lawn Mower - Parts

This flange bolt is a genuine OEM replacement part for use in lawn and outdoor equipment. It has a diameter of 6mm and a length of 12mm. The bolt has a wider circular area that protrudes out from the bolt head, known as a flange. The flange prevents the bolt from moving or loosening during use. Over time the bolt may corrode, crack, or it...Read mores threads may wear down. In this case the bolt will need to be replaced. Visually inspect the other bolts in your equipment to ensure your order the correct number, as each bolt is sold individually. Use a wrench to remove any faulty bolts and install the new bolts in place. Be careful not to overtighten your bolts as you may risk damaging the equipment and the bolt.

This is a genuine Honda replacement part that is intended to be used with small engines. The metal lock pin is used to secure a part assembly like a ball bearing to a shaft like the governor arm. The lock pin is sold as an individual replacement part.

This is an 8mm hex nut, which is a six-sided piece of hardware that connects two parts together in your lawn equipment by keeping screws, bolts, or studs in place. Hex nuts are commonly used in areas of your machine that undergo high stress like in the blade assembly, engine or wheels. If a hex nut is broken, it may be cracked or corroded...Read more, and you may find that you cannot tighten it enough to hold parts in your machine together. If it is not replaced, the parts of your machine may come apart. To remove a hex nut, use a wrench to turn it counterclockwise. Before purchasing this OEM replacement part, keep in mind that this part is sold individually and consult your instruction guide to find out how many nuts your machine needs and where they are located. It is best to replace all the hex nuts at once because they wear out at the same time.

Hex nuts are used within small engine equipment for a variety of reasons, such as fastening bolts, screws, or studs, and in general assembly to join two parts together. This hex nut is made of durable metal and is sold as an individual OEM part for use within small engine equipment such as snow blowers, generators, tillers, trimmers, and ...Read morelawn tractors. This hex nut serves a variety of purposes, depending on the location and piece of equipment it is installed within. This hex nut measures 6mm in inner diameter and will require a hex socket wrench to install and replace.

This is a genuine replacement part sourced from the original manufacturer for use with small engines. The special drain plug bolt is used to seal the oil drain and is used when changing the engine oil. A hex socket is required to install the drain plug bolt. The bolt is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines for lawnmowers, snowthrowers, tillers, and blowers. This gasket is used to seal the connection between the carburetor body and the insulator. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This gasket is sold individually.