HT21TS52SW Haier Refrigerator - Parts

The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the switch. The switch is spring loaded and is a generally closed type of switch meaning there should be no continuity when the button is depresse...Read mored, and continuity through the switch when the button is not depressed. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat blade screwdriver and needle nose pliers.

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different than the original, but should function the same.

This white refrigerator door handle is designed to provide a secure grip and smooth operation for opening and closing the appliance. Constructed from durable materials, it serves as a direct replacement for handles that are cracked, loose, or detached. Its clean finish complements the refrigerator’s exterior while restoring both functiona...Read morelity and appearance. Installation is straightforward and typically involves aligning the handle with the mounting points and securing it with screws as outlined in the owner's manual. This component helps maintain the integrity of the appliance and ensures reliable daily use.

This plug button is designed for use with various makes and models of refrigerators and is made of white plastic. Used for cosmetic purposes to fill and cover the securing screw of the door handle, this plug button features an approximately 0.5-inch outer-diameter. To install, simply remove the old plug with a flathead screwdriver or flat tool and push the new plug into place.

Warm air entering around a refrigerator door can make the cooling system work harder. This white door gasket provides the flexible barrier between the fresh food door and the cabinet. Inspect the seal if the door closes poorly or if condensation appears near its edges. Dirt on the gasket, loose hinges, an uneven appliance, or blocked shel...Read moreves can cause similar problems, so check these areas first. Confirm the refrigerator model before ordering because gasket size and mounting style must match. Disconnect power before service, remove the old seal without damaging the door liner, and press the replacement evenly into its channel.

This is a control board meant to control the defrosting function within various compatible models of refrigerator. This is a genuine OEM part that is sold by itself, without any other hardware. This control board communicates with various temperature sensors/thermistors to prevent excessive frost buildup on the evaporator coils and connec...Read morets directly within the cold control housing of your refrigerator. If you notice excessive frost or ice buildup, or the opposite in abnormally warmer temperatures within your refrigerator, it would be worth inspecting this board. You can also test this control board for continuity with a multimeter if you suspect it has failed from electrical problems. You will need a screwdriver to gain access to the housing the control board is kept in, in order for you to remove it. To replace it, disconnect your fridge from its wall outlet and unscrew the securing hardware from the housing with the control board. Remove any wire harnesses or cables connected to the control board and now you can install the new one or test the old one. Then simply reassemble the housing.

The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.