HT21 (2002-08) Jonsered Hedge Trimmer - Parts

This is an authentic replacement foam filter commonly used on handheld lawn and garden equipment. The purpose of this air filter is to prevent dust and other particles from entering carburetor and engine. Includes one (1) filter per order. Replacing this filter is a quick and easy task. It will only require a phillips head screwdriver. ...Read more • Remove screw that hold filter cover • Remove cover and replace air filter • Reassemble and test your equipment

This genuine replacement screw is a high-quality OEM part designed for use with Paramount and Poulan gas-powered lawn and garden equipment. It is specifically engineered to secure the starter rope within the pulley, ensuring reliable starting performance. Made from durable metal, this specialty screw is sold individually. Installation...Read more Tip: A flat-head screwdriver is required for removal and installation. For proper placement and application, please refer to your equipment’s model diagram.

The Carburetor Assembly (Carburetor, WT 379 w/ Limiter Caps) includes the carburetor and primer bulb. This assembly requires a screwdriver, pliers, and a wrench set, and is rated as "Easy" to install by customers. This assembly is metal, with a plastic primer bulb. It attaches to the intake of the engine, in order to mix the fuel/air to t...Read morehe proper ratio for combustion. If broken due to wear/fatigue/damage you may notice performance isseus, the engine may run rough and be hard to start. If this happens, the part should be replaced. Refer to your make, model and diagram to ensure this model is correct.

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.

This replacement screw is a high quality hardware that is designed for use with Paramount, Poulan and Weed Eater power equipment. It has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable hex socket head screw is included per order.

This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.

This fuel pump diaphragm, also called a membrane or a gasket, is what helps pump fuel from the tank to the engine of your gas-powered lawn equipment. It is normally found attached to the carburetor assembly itself. You can tell that the diaphragm is broken when your engine is not starting properly, lacks power, or frequently stalls. You m...Read moreay also notice that your machine is leaking fuel or smells strongly of gasoline. A broken diaphragm could lead to engine performance problems, and it may eventually stop working altogether. When replacing your old diaphragm, you will need a wrench to disconnect it from the fuel pump housing. Kindly note that this OEM-sourced component is sold individually.

This is a genuine OEM approved replacement part designed for use with Hitachi nailers. The piston is a central component of an engine. It both provides compression within the engine, as well as transfers the energy from combustion to the crankshaft (which creates rotation). This assembly includes the metal piston, ring, two retainers and ...Read morethe pin. Replacing the piston assembly is not the simplest repair, but it is definitely something you can do yourself. You will need a screwdriver to remove the cover and a set of sockets and wrenches for the rest of the repair.

This carburetor repair kit is supplied by the original manufacturer for use in trimmers. The kit includes the diaphragm and carburetor gaskets, strainers, primer bulb, inlet needles, springs, and pins. It is normal for gaskets to wear down, brittle, or lose their sealing ability over time due to exposure to fuel, heat, and pressure. Fault...Read morey gaskets can result in loss of compression, inadequate lubrication, overheating, and engine damage due to fuel, oil, and air leakages. This complete kit allows you to repair your carburetor. Remove each faulty gasket and clean the mounting surfaces with a soft cloth or brush surfaces. It is recommended to lay all the parts out in order during disassembly, to make the installation process easier. Position the replacement parts in the appropriate position and ensure they are securely fitted before reassembling the rest of the carburetor.

This is an authentic OEM sourced replacement part which is specially designed for use with handheld lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is an authentic part that is specially manufactured for use with Craftsman handheld lawn and garden equipment. The starter grip attaches to the rope to provide a user with a comfortable grip to pull start the engine. Check the owners manual and the appropriate diagram of your model for the correct application of this part. This high-quality component is made of durable plastic and is sold individually.

This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Paramount and Poulan lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams for the correct location and application of th...Read moreis part. This high-quality hex socket head screw is made of durable metal and it is sold individually.