HRT18F2APP Haier Refrigerator - Parts

The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the switch. The switch is spring loaded and is a generally closed type of switch meaning there should be no continuity when the button is depresse...Read mored, and continuity through the switch when the button is not depressed. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat blade screwdriver and needle nose pliers.

This plug button is designed for use with various makes and models of refrigerators and is made of white plastic. Used for cosmetic purposes to fill and cover the securing screw of the door handle, this plug button features an approximately 0.5-inch outer-diameter. To install, simply remove the old plug with a flathead screwdriver or flat tool and push the new plug into place.

This is a control board meant to control the defrosting function within various compatible models of refrigerator. This is a genuine OEM part that is sold by itself, without any other hardware. This control board communicates with various temperature sensors/thermistors to prevent excessive frost buildup on the evaporator coils and connec...Read morets directly within the cold control housing of your refrigerator. If you notice excessive frost or ice buildup, or the opposite in abnormally warmer temperatures within your refrigerator, it would be worth inspecting this board. You can also test this control board for continuity with a multimeter if you suspect it has failed from electrical problems. You will need a screwdriver to gain access to the housing the control board is kept in, in order for you to remove it. To replace it, disconnect your fridge from its wall outlet and unscrew the securing hardware from the housing with the control board. Remove any wire harnesses or cables connected to the control board and now you can install the new one or test the old one. Then simply reassemble the housing.

The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.

This white freezer door gasket seals the freezer compartment to prevent cold air loss and moisture intrusion. Maintaining a proper seal helps ensure efficient operation and consistent freezing performance, making replacement necessary when the gasket becomes brittle or damaged.