HPS16BTNCLWW Hotpoint Refrigerator - Overview

This is the light switch that goes in your refrigerator. If the light is not working or stays on, you may need to replace the switch. It is made of mainly white plastic, and is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simpl...Read morey use a flathead screwdriver to pop the switch out from the refrigerator wall, then disconnect the wires. Reconnect the wires to the new switch, snap it into place, and the repair is complete.

This blade attaches to the evaporator motor.

The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side brack...Read moreet on the evaporator fan motor assembly. To access the bumper, you will need to remove the evaporator fan motor assembly from the freezer. This part is made of orange rubber and is less than half an inch in diameter. It has a rounded top and a slightly pointed bottom, and is sold individually.

The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of blades on your fan. The fan blade is made of white plastic and is approximately 6 inches in diameter. If your freezer section is too warm, o...Read morer you notice a strange noise coming from your refrigerator when it is running, you may need to replace the condenser fan blade assembly. This part is sold individually.

This dairy door is a genuine OEM replacement designed to cover the butter or cheese compartment inside your refrigerator. Made from durable materials with a sleek finish, it helps maintain proper temperature and organization for dairy items while providing easy access through its integrated handle. Ideal for replacing a cracked, broken, o...Read morer missing door, this part ensures a secure fit and smooth operation. Installation is quick and requires no special tools—simply follow your appliance’s manual for proper placement.

This genuine OEM cover fits over the crisper drawer to help maintain optimal humidity, keep produce fresh, and prevent spills inside the refrigerator. Made from durable plastic, it ensures proper airflow and sealing for longer-lasting fruits and vegetables while improving organization. Ideal for replacing cracked or damaged covers, this p...Read moreart restores food preservation efficiency and a clean, functional interior. Installation is simple—remove the old cover and slide the new one into place for a secure fit.

If ice spills inside the freezer or the storage bin no longer slides correctly, a damaged bucket may be the cause. This replacement container collects and stores cubes made by the refrigerators automatic ice maker. Its simple plastic design allows the bin to be removed for serving or cleaning. Inspect the support rails and nearby ice-maki...Read moreng parts before installation, since a bent guide or heavy ice buildup can also block movement. Confirm the appliance model and compare the new bin with the old one. Remove any stored ice, slide out the worn bucket, clean the mounting area, and insert the replacement evenly.

This plug button is designed for use with various makes and models of refrigerators and is made of white plastic. Used for cosmetic purposes to fill and cover the securing screw of the door handle, this plug button features an approximately 0.5-inch outer-diameter. To install, simply remove the old plug with a flathead screwdriver or flat tool and push the new plug into place.

A loose refrigerator part may be caused by a damaged screw or worn mounting hole. The correct screw helps keep parts lined up and secure. First check the required thread, length, head shape, and exact location. Match the screw to the complete appliance model because similar screws may not be safe in every spot. Unplug the refrigerator bef...Read moreore removing any cover near wires, and support the door if working on a hinge. Use the right Phillips driver, avoid cross-threading, and do not overtighten the screw. Stop if it will not turn in by hand.

This main control board is a vital electronic component that governs the essential operations of compatible refrigerators. Acting as the central processor, it regulates temperature settings, manages fan speeds, controls the defrost cycle, and coordinates other key functions to ensure consistent cooling and food preservation. Integrated LE...Read moreD lighting enhances visibility within the refrigerator, while sensor inputs allow the board to dynamically adjust performance for optimal energy efficiency. A malfunctioning control board may result in erratic temperatures, non-functional lighting, or unresponsive controls. Replacing a faulty unit with this genuine OEM component restores reliable operation and supports long-term appliance performance.

An ice maker that fills slowly, makes undersized cubes, or leaks may have a faulty water inlet valve. This electrically operated valve controls when water enters the ice-making system. It should open during the fill cycle and close tightly afterward. Mineral deposits, damaged seals, or an electrical fault can interfere with its operation....Read more Check for low water pressure, a clogged filter, kinked tubing, loose wiring, or a frozen fill tube before replacing the valve. Unplug the refrigerator and close the household water valve before beginning. Follow the appliance diagram, avoid damaging nearby tubing, and test all connections carefully for leaks when finished.