HES5053U8 Bosch Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't operated. Error code F9
76 of 101 people
found this instruction helpful.
-
Richard from Centennial, CO
- Really Easy
- Less than 15 mins
-
Nutdriver
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Read less
Was this helpful?
Thank you for voting!
burned out burner
70 of 99 people
found this instruction helpful.
-
Lori from Winter Haven, FL
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ
... Read more
ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Read less
Was this helpful?
Thank you for voting!
anti-tip bracket not installed
35 of 47 people
found this instruction helpful.
-
Brian from Panama City Beach, FL
- Really Easy
- Less than 15 mins
I was selling my home and did not realize that the anti-tip bracket was not originally installed. A home inspection caught the problem and the buyers required that I install one. I could not find the original and obviously the installer never put it in place to begin with. The buyers wanted this resolved within a week so I had to act f
... Read more
ast. I could not find one locally so I found what I needed on your website. It arrived in a couple of days and was easy to install. I used the template provided in the kit and drove the screws through the bracket into the wood plate behind the drywall. Pushed the range back in place and that's it. Couldn't get any easier.
Read less
Was this helpful?
Thank you for voting!
replacing the fan on a convection oven (fan was making a vibration noise)
17 of 26 people
found this instruction helpful.
-
John from Stevensville, MD
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. O
... Read more
nce there was access to the fan I found that the fan was warped and that the blades were scraping against the back wall of the oven. The next challenge was to remove the retaining nut. I used a sheet metal screw to secure the warped fan to keep it from spinning. once I figured out that you have to turn the retaining nut to the right to loosen, it came off easily. 1/2" socket with extension. When I replace the fan I used two washers for spacers to make sure that the fan would not scrape the wall of the oven. Its been tested many times and the oven does not make that horrible sound anymore.
Read less
Was this helpful?
Thank you for voting!
Aluminum foil accidentally put on bottom panel ....burnt up, left non removable residue.
10 of 11 people
found this instruction helpful.
-
lewis from COLDWATER, MI
- Easy
- 15 - 30 mins
-
Screw drivers
After 15 minutes of frustration and back breaking I removed the oven door and had much better access to the panel, from there on it was all down hill.
Was this helpful?
Thank you for voting!
2 elements stopped working.
9 of 14 people
found this instruction helpful.
-
Ruth from MORGANTOWN, WV
- Really Easy
- 30 - 60 mins
-
Nutdriver
My husband followed the video instructions and it was easy to fix.
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people
found this instruction helpful.
-
Lise from CEDAR GROVE, NJ
- Very Easy
- Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Aluminum foil baked on surface
6 of 6 people
found this instruction helpful.
-
Cindy from RHINELANDER, WI
- Easy
- Less than 15 mins
-
Screw drivers
Took out 2 screws, removed panel.
When you put the panel in don’t push it tight to the front or the screws won’t align. Just place in gently and the screws will align
When you put the panel in don’t push it tight to the front or the screws won’t align. Just place in gently and the screws will align
Was this helpful?
Thank you for voting!
broken lens over oven light
11 of 22 people
found this instruction helpful.
-
Leslie from Warsaw, VA
- Really Easy
- Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!
old element coil burned apart breaking the circuit.
6 of 8 people
found this instruction helpful.
-
James from WARRENTON, MO
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Screw drivers
removed the old burner and put the new one in it's place.
Was this helpful?
Thank you for voting!
Bottom panel burned through
5 of 6 people
found this instruction helpful.
-
Barry from MENDON, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove two back knurled screws, lift out old bottom, screw in new bottom panel. Removal of oven door (two flip out handles at hinge( makes this a little easier. Our oven did not need any other dis-assembly.
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people
found this instruction helpful.
-
ANGELA from MEBANE, NC
- Very Easy
- Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Rusted leveling foot
6 of 9 people
found this instruction helpful.
-
Melinda from Three Rivers, MA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I couldn't unscrew the leveling foot because it was rusted and corroded. The bracket holding it was easy to remove so I took the bracket with the corroded foot off and replaced it with the new foot and bracket. Very simple. I made sure I oiled it so it wouldn't rust again.
Was this helpful?
Thank you for voting!
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 people
found this instruction helpful.
-
Phyllis from GAINESVILLE, GA
- Easy
- Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in
... Read more
the house.....I show them what I DID!! :-)
Read less
Was this helpful?
Thank you for voting!
Had aluminum foil stuck on bottom
4 of 4 people
found this instruction helpful.
-
George from JACKSON, MI
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed 2 screws, pulled out the panel, replaced the new panel and replaced the two screws. Less than 5 minutes.
Was this helpful?
Thank you for voting!