GXV690RTAF2 Honda Engine - Parts

This replacement oil filter is specially designed for use with Honda small engines. It is an authentic OEM part, not an aftermarket alternative. This oil filter helps to remove harmful contaminants from engine oil. It is recommended to replace oil filter at least once a season. Please note, one filter is included per order. Replacing an ...Read moreoil filter you will need a filter wrench or pipe wrench. • Disconnect the spark plug • Remove the old filter • Clean the adapter surface • Lightly oil the filter gasket with clean engine oil • Install the new filter

It is a genuine item that is supplied by the original manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. This is one of the flange nuts that are utilized to secure the exhaust manifold. A flange nut is designed to provide a tight fit and resist loosening. Replacing it is a simple task tha...Read moret should only require a wrench to remove and secure it. To ensure the correct location, please refer to the diagrams of your model. One durable metal nut-flange is included.

This OEM-manufactured flange bolt provides a secure connection between two parts of your equipment. What is different about a flange bolt is that it has a wide, flat flange at the end. This helps to distribute the load being applied to it and prevents the bolt from becoming loose. Flange bolts are commonly found in lawn equipment, but the...Read moreir location varies by the make and model of the machine. When damaged, the part that the flange bolt was holding may loosen and fall off. You also may observe that it the flange bolt is cracked or corroded. It is important for you to replace broken flange bolts immediately as loose or vibrating parts can detach from your equipment while it is operating. You need a socket wrench to remove a flange bolt, as well as rust dissolver or penetrating oil if it is stuck. This replacement part is sold individually so make sure that you consult your user guide to identify where your flange bolts are and how many your equipment needs.

This is an authentic Honda replacement part. The flange bolt is designed by the manufacturer for use in small engines. This part is made of metal, and is generally used to secure the muffler bracket to the muffler. Please be aware that there are different bolts used in the machine. Refer to the parts diagram to be sure of ordering the...Read more correct part. You will require a wrench when replacing this part. This item is sold individually.

This flange bolt is a genuine OEM replacement part for use in lawn and outdoor equipment. It has a diameter of 6mm and a length of 12mm. The bolt has a wider circular area that protrudes out from the bolt head, known as a flange. The flange prevents the bolt from moving or loosening during use. Over time the bolt may corrode, crack, or it...Read mores threads may wear down. In this case the bolt will need to be replaced. Visually inspect the other bolts in your equipment to ensure your order the correct number, as each bolt is sold individually. Use a wrench to remove any faulty bolts and install the new bolts in place. Be careful not to overtighten your bolts as you may risk damaging the equipment and the bolt.

Filter, Oil (Filtech Toyo Roki) (Sold Individually)

This is an original replacement part sourced directly from the manufacturer. The piston pin clip is commonly found in Honda small engines. This part is made of metal, and is used to secure the piston pin that holds the connecting rod in the piston. You may require a wrench, and pliers when replacing this product. This item is sold as an individual replacement part.

The governor holder clip goes next to the governor weight holder. This item is made of a durable material and is sold individually. It is an original part from Honda, Toro, and Lawn Boy for use in engines. If this part becomes broken it will need to be replaced and may require a set of pliers during the installation.