This package of two includes one carbon block pre-filter with a gray end cap and one carbon block post filter with a green end cap. The filter with the gray end cap is installed first and should be placed on the water inlet side (from the water supply). The green filter is installed second and should be installed on the water exit side (t...Read moreo your tap/refrigerator). This filter is compatible with brands that can support 10-Inch by 3-Inch filters.
This water filter filters down to 0.5 microns and is designed to protect your drinking water from cysts, chlorine odor and flavor, sediment, rust, and VOC's. The first stage removes the larger particles, followed by the second stage where it enters a finer membrane and active charcoal element. It should be replaced every six months or 600 gallons, whichever comes first, and this can vary depending on your local water conditions.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
O-ring on my under-the-sink water filter had broken
3 of 4 peoplefound this instruction helpful.
Dennis from Burke, VA
Really Easy
Less than 15 mins
I simply replaced the old O-ring; rubbed a bit of petroleum jelly around the seal and rescrewed the filter cannister back in place. It was easy, and worked like a charm!