GX270RTRSC2 Honda Engine - Parts

This item is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines. This item is used to provide spacing between the carburetor and the air cleaner assembly. The carburetor spacer is priced as a single item.

This is an original replacement part manufactured for use with Honda small engines. This gasket provides a seal between the air cleaner elbow, and the muffler nose, which holds the air cleaners. Gaskets can wear out over time, and it is recommended to replace worn gaskets to maintain good seals. The elbow gasket is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. The lever provides a user with a comfortable grip to adjust the choke on the carburetor. When the choke knob is pulled out, the choke plate (on the front of the carb...Read moreuretor throat) is rotated to the choked position. The choke draws additional fuel into the carburetor during a cold start. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. To ensure the correct installation of this lever, refer to the diagrams of your model. One durable plastic part is included.

This muffler protector is an original part from Honda. Compatible with many small engines, this metal component is designed to cover and provide protection to the muffler. This item is sold individually. A screwdriver and an adjustable wrench are needed for the removal and replacement.

It is made of metal and is priced individually. The starter return spring connects to the recoil starter pulley. A set of pliers, a socket set, and a wrench set might be required during the replacement of this part. It will need to be replaced if it breaks. This authentic item is supplied by the original equipment manufacturer for use with Honda small engines.

This flange bolt is a genuine OEM replacement part for use in lawn and outdoor equipment. It has a diameter of 6mm and a length of 12mm. The bolt has a wider circular area that protrudes out from the bolt head, known as a flange. The flange prevents the bolt from moving or loosening during use. Over time the bolt may corrode, crack, or it...Read mores threads may wear down. In this case the bolt will need to be replaced. Visually inspect the other bolts in your equipment to ensure your order the correct number, as each bolt is sold individually. Use a wrench to remove any faulty bolts and install the new bolts in place. Be careful not to overtighten your bolts as you may risk damaging the equipment and the bolt.

This is a genuine replacement part sourced from the original manufacturer for use with small engines. The special drain plug bolt is used to seal the oil drain and is used when changing the engine oil. A hex socket is required to install the drain plug bolt. The bolt is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic manufacturer sourced replacement part. It is commonly used on Honda engines. This item consists of pleated paper filter in a metal frame and a foam pre-filter. Its purpose is to filter out dust and debris from contaminating the engine. Over time it will get clogged no longer allowing for the air flow. This would reduc...Read moree engines power and eventually it will no longer be able to run. It is recommended to replace air filter at least once a season to ensure top performance. Replacing this filter element is a simple task that does not require any tools. • Remove the wing nut that hold the cover • Remove the air cleaner cover • Remove old filter and secure the new one • Reassemble and test the unit