GT2654F ((960430294-00)(2018-10)) RedMax Lawn Tractor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people
found this instruction helpful.
-
Anthony from OLIVEHILL, TN
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken weld on right axle
1 of 2 people
found this instruction helpful.
-
walter from EDINBURG, VA
- Easy
- 30 - 60 mins
-
Pliers, Socket set
Removed wheel (used strong magnet to catch the keeper)
Removed axle assembly from its mounting tube
(used strong magnet again to prevent keeper lose)
Installed replacement axle (again with the magnet)
Lubricated with 90 SAE
Re-installed the wheel (used magnet again to hold the keeper.
Mowed the lawn.
Removed axle assembly from its mounting tube
(used strong magnet again to prevent keeper lose)
Installed replacement axle (again with the magnet)
Lubricated with 90 SAE
Re-installed the wheel (used magnet again to hold the keeper.
Mowed the lawn.
Was this helpful?
Thank you for voting!
Dryer runs no heat
2 of 9 people
found this instruction helpful.
-
Russell from MACON, GA
- Easy
- 15 - 30 mins
-
Screw drivers
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Other Parts Used:
Was this helpful?
Thank you for voting!
Front wheels, too much end play
10 of 38 people
found this instruction helpful.
-
Frederick from BINGHAMTON, NY
- Very Easy
- Less than 15 mins
Shimmed the wheels out on axle.. No more slop.
Was this helpful?
Thank you for voting!