My Orders
- Home
- GRMC2273CF00
- Instructions
GRMC2273CF00 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Missing door magnet for the open/close switch
5 of 11 people
found this instruction helpful.
-
Bruce from LAKEVILLE, MN
- Very Easy
- Less than 15 mins
Installed the magnet in the bracket on the bottom of the door.
Was this helpful?
Thank you for voting!
ICE WOULDN'T DISPENSE FROM ICE BOX
5 of 12 people
found this instruction helpful.
-
James from ORLANDO, FL
- A Bit Difficult
- 30 - 60 mins
I read other suggestions trying isolate auger motor shaft with pliers while turning bar drive. needle nose pliers could hold the shaft. bar drive just would spin. so took the whole ice box assembly out
(only 2 screws) and with a metal cutting blade used the sawzall to cut along the shaft. freed it up enough to then unscrew it from t ... Read more hat point. Left handed threads by the way.
(only 2 screws) and with a metal cutting blade used the sawzall to cut along the shaft. freed it up enough to then unscrew it from t ... Read more hat point. Left handed threads by the way.
Read less
Was this helpful?
Thank you for voting!
A set scew was ordered twice.
1 of 2 people
found this instruction helpful.
-
Susan from BRAINTREE, VT
- Very Difficult
- 1- 2 hours
The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again.
The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
Was this helpful?
Thank you for voting!
From day one the installer did not tighten the screw in the freezer handle. It finally came apart. They didn't leave me the Allen wrench for my fridge.
1 of 5 people
found this instruction helpful.
-
Margaret from WINDER, GA
- Very Easy
- Less than 15 mins
Simple tightening of the screw with the right tool.
Was this helpful?
Thank you for voting!