EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GRL258STKA (ATICLGA) LG Refrigerator - Instructions

All Instructions for the GRL258STKA
76 - 90 of 122

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
plastic tube leaking at connector
1 of 5 people found this instruction helpful.
  • GREG from STILLWATER, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Wrench (Adjustable)
Uncoupled the old connector, replaced with new connector and attached supply line. Repair easy with right part, prior to ordering the right part I had tried a compression fitting and it still leaked. U-tube and others demonstrating repair assured me I was on the right path.
Was this helpful?
Thank you for voting!
Frost in the freezer. Icemaker frozen.
1 of 8 people found this instruction helpful.
  • Teresa from Miami, FL
  • Really Easy
  • More than 2 hours
I called LG and followed the instructions given over the phone. The instructions couldn't have been simpler. Disconnect the appliance for several hours and then connect again. I disconnected the appliance overnight, cleaned out the freezer, and reconnected it. Problem solved. Did not need to call a repairman and did not use the clips.
Was this helpful?
Thank you for voting!
Water/ice maker not working
9 of 38 people found this instruction helpful.
  • Brent from ROGERS, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Was this helpful?
Thank you for voting!
shelf broke
  • carmine from elk grove, CA
  • Really Easy
  • Less than 15 mins
Replaced rails and glass top. Thanks for the quick shipping and cheapest price
Was this helpful?
Thank you for voting!
Drawers were broken and both slides were chipped
  • Richard from Nabarre, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
looked at the model diagram to see what was missing. copied down your schematic and I ordered the required parts over the phone. It was very easy to do. The parts arrived in two days.
Was this helpful?
Thank you for voting!
broken
  • william from mashpee, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed 1 screw and replaced
Was this helpful?
Thank you for voting!
Guide assembly rails
  • Virginia from Raleigh, NC
  • Really Easy
  • Less than 15 mins
Very easy just took old out and put in the new ones. Took less then 2 min.
Was this helpful?
Thank you for voting!
The gasket on both top doors were torn
  • Walter from Carson, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I first took off a plastic trip strip which just popped off with a little pull. Then I pulled the gasket off slowly all around the perimeter of the door and snapped off the guide strip with the help of a screwdriver. I installed the gasket next first the guide strip then followed up with the pushing the gasket into the groove all around the door. Did the same procedure on the other door. The gaskets came very well packed and undamaged. It took approximately 2 weeks because one gasket was on back order. Thank you for your help with these parts. It would have cost me 3 times as much if the repairman performed this repair.
Was this helpful?
Thank you for voting!
Lamp cover and case had melted
  • Donna from Abilene, TX
  • Easy
  • Less than 15 mins
  • Screw drivers
I removed the old lamp cover and case. Discovered that the last repair person had not re installed it correctly so the case had melted from the bulbs. I Removed the screws that was supposed to hold it up, assembled the case and cover, inserted the screws and anchored them in where they belong. Problem solved!
Was this helpful?
Thank you for voting!
cracked funnel installing ice door relay
  • nicholas from Southampton, PA
  • Really Easy
  • Less than 15 mins
clipped new part on ice door
Was this helpful?
Thank you for voting!
broken
  • Phyllis from Bocca Raton, FL
  • Really Easy
  • Less than 15 mins
easy and quickly Thank you for your prompt delivery and excellant service
Was this helpful?
Thank you for voting!
broken hinge
  • Roman from West Chester, PA
  • Really Easy
  • Less than 15 mins
Removal was pretty easy-- replacing crisper drawer took a little care so as not the snap off the hinge- thank you for the speed in which I got my part, no sooner did I order my part- it showed up at my door. your service was outstanding, put you in my favorites just incase I need to order again.
Was this helpful?
Thank you for voting!
Part was broken, replacement part required
  • Guy from Pittsburg, KS
  • Really Easy
  • Less than 15 mins
Replacing the broken part with the new part was really quite simple. The part just snapped in. The part was identical to the original. I must add that the web site was very easy to navigate, find the part, and order it. The part arrived very quickly. Guy
Was this helpful?
Thank you for voting!
Broken Drawer Slide Rails
  • Brian from Fairmont, WV
  • Really Easy
  • Less than 15 mins
Be sure to order two if both are broken. The picture shows two but only comes as a single item. Super easy to replace.
Was this helpful?
Thank you for voting!
Plastic door latch/ cam shaft broke on left side door
  • Reginald A. Green from Pelham, AL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed white plastic trim and installed new latch / cam shaft
Was this helpful?
Thank you for voting!
All Instructions for the GRL258STKA
76 - 90 of 122