- Home
- GRL258SSKA
- Instructions
GRL258SSKA (ASTCLGA) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
interior lights stay on
-
Rich from Pequannock, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Changed door switch. Repair worked for a few days but re-occured. Possibly the other switch is bad .
Was this helpful?
Thank you for voting!
Guide assembly rails
-
Virginia from Raleigh, NC
- Really Easy
- Less than 15 mins
Very easy just took old out and put in the new ones. Took less then 2 min.
Was this helpful?
Thank you for voting!
not a problem
-
LORI from INDIANAPOLIS, IN
- Really Easy
- Less than 15 mins
snap it on!
Was this helpful?
Thank you for voting!
shelf broke
-
carmine from elk grove, CA
- Really Easy
- Less than 15 mins
Replaced rails and glass top. Thanks for the quick shipping and cheapest price
Was this helpful?
Thank you for voting!
Drawers were broken and both slides were chipped
-
Richard from Nabarre, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
looked at the model diagram to see what was missing. copied down your schematic and I ordered the required parts over the phone. It was very easy to do. The parts arrived in two days.
Other Parts Used:
Was this helpful?
Thank you for voting!
Lights in upper refrigerator would not turn off with doors closed
-
G.J. from WHITE BIRD, ID
- Really Easy
- 15 - 30 mins
-
Screw drivers
replaced melted light covers, replaced switches, and found another problem with power circuit board relay, on order now!!
Other Parts Used:
Was this helpful?
Thank you for voting!
the lights inside the frig weren't shutting off
-
Brian from Troutdale, OR
- Really Easy
- 15 - 30 mins
-
Screw drivers
the lights melted the lamp case and cover. I determined it was the switch ,but there was 2 of them . I replaced both . I used a screw driver to pry the covers off the switches which are on the top of the unit .Then I press the tabs on the switch and pulled it out. Slip the wire connect off. slip the wire connect on new switch press it in
... Read more
till the tabs snap in ,put covers back on. the lamp base and cover had two screws holding them, pull the screws slip the old melted base and cover. snap the new base and cover in and put the screws in done!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Broke the crisper drawer front
-
Johnny from Acworth, GA
- Really Easy
- Less than 15 mins
While cleaning out the frig we removed the bottom shelf to remove the glass and really scrub it down. When we went to put it back in, my wife grabbed the crisper door front and snapped it offf. I immediately went to the computer to find a replacement part and found PartSelect.com. I plugged in the model number and I immediately saw a d
... Read more
iagram to pick out my part. I had it ordered before she got all the food back in the frig! The part arrived early and I installed it in a matter of seconds. So easy to find the part, order it and install. You have a new customer!!!
Read less
Was this helpful?
Thank you for voting!
Crisper Drawer broke on right hinge
-
Kevin from Reno, NV
- Really Easy
- Less than 15 mins
Replacement part from PartSelect was OEM, identical to original part. Installation was very quick. Inserted hinge on left side and then depressed the right side to slip it into place. Presto, it was done. Most impressed with PartSelect on the OEM replacement part and very prompt delivery.
Was this helpful?
Thank you for voting!
broken hinge
-
Roman from West Chester, PA
- Really Easy
- Less than 15 mins
Removal was pretty easy-- replacing crisper drawer took a little care so as not the snap off the hinge- thank you for the speed in which I got my part, no sooner did I order my part- it showed up at my door. your service was outstanding, put you in my favorites just incase I need to order again.
Was this helpful?
Thank you for voting!
Broken tab on hinge of drawer crisper
-
Jim from Indian Harbour Beach, FL
- Really Easy
- Less than 15 mins
Replace the drawer crisper
Was this helpful?
Thank you for voting!
Crisper Drawer Fronts Broken at Hinges
-
Frances D. from Oxford, OH
- Easy
- 15 - 30 mins
No installation instructions. I just took everything out of the shelf holding the drawers and figured it out myself. Unfortunately today's products are made with cheap brittle plastic. This is the second time I have ordered parts for this refrigerator from you and I am glad you are so efficient and shipped orders quickly.
Was this helpful?
Thank you for voting!
The LH top door latch broke.
-
Mike from Cedar Falls, IA
- Easy
- 15 - 30 mins
-
Screw drivers
At first, ordered only a latch only to discover the mounting strip had instead failed. Ordering parts wasn't difficult although the parts catalog graphic leaves a lot to desire. Once I figured out how to remove the strip (had to remove the seal first and no instructions existed), it was easy to snap out the old and snap in the new part. T
... Read more
his sure beat the cost of paying a repairman. However I fear than most homeowners that aren't mechanically inclined wouldnt have been successful because of no instructions and the parts catalog that had poor detail and a very small size.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Lights Stayed on Melted Light cover
-
Walter from Vero Beach, FL
- Easy
- 15 - 30 mins
-
Screw drivers
Replaces door switches - removed screw from door hinge cover, lifted cover and removed switch. Plugged in new switch and reversed process. Removed screws from light bracket. Attached new frame to slots in roof and used screws to attach. Clipped on light cover.
Other Parts Used:
Was this helpful?
Thank you for voting!
icemaker quit working
-
William from Bridge City, TX
- Easy
- 30 - 60 mins
My husband took out the ice maker. We ordered the part. He looked on YouTube for instructions. Including looking up instructions, I think it took him way less than an hour.
Was this helpful?
Thank you for voting!