GR-L248MSYM LG Refrigerator - Parts

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.

This genuine freezer door gasket helps create an airtight seal around the freezer compartment, preventing warm air and moisture from entering while keeping cold air inside for efficient cooling performance. Replacing a worn, torn, or damaged gasket can help reduce frost buildup, improve temperature consistency, minimize energy loss, and k...Read moreeep frozen foods properly preserved. Made from durable, flexible rubber, this replacement gasket is designed to provide a secure seal and reliable long-term performance. Installation is simple using the existing door channel. If the gasket has folds or creases from shipping, soak it in warm water for 5–10 minutes or gently warm it with a hair dryer on a low setting to help restore its shape before installation. Once installed, smooth out any remaining wrinkles and keep the freezer door closed for several hours to allow the gasket to conform properly to the door frame and create a complete seal. The gasket measures approximately 35 inches wide by 24-1/2 inches high.

This is a door seal, also known as a door gasket, for LG refrigerators. This door gasket is used to seal the warmer room temperature from the cooler fridge interior. If the gasket for your refrigerator is warped, moldy, or damaged in any way, it needs to be replaced immediately. To replace this gasket, simply pull off the old gasket to re...Read moremove it, and carefully wrap the new gasket around the door perimeter. This gasket is sold individually and does not include any other parts.

This fridge gasket, also known as a door seal, is an authentic OEM part supplied by LG for use with various models of LG refrigerators. It is a flexible strip of rubber that sits along the perimeter of the refrigerator. It creates an airtight seal between the door and fridge body to prevent cold air from escaping and warm air from enterin...Read moreg. This helps to keep your fridge cool and energy efficient. If the gasket is worn out, torn, or can no longer maintain a tight seal, your fridge will have to work harder to maintain the correct temperature inside the fridge. You may also notice that the door may not be able to close properly.

This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing is in working order, but is hanging loose inside the unit, the issue could be that the clip meant to hold it in place is broken. If this is t...Read morehe case, you should look to replace the clip. This clip is made of black plastic, and is just over half an inch long. This is a genuine OEM replacement part, and is sold separately.

This genuine OEM ice maker assembly is compatible with various models of LG refrigerators. The assembly includes the icemaker unit, ice mold, water inlet valve, ice bin, thermostat, and wiring harness. It has a length of approximately 12 inches, and it is located within the freezer compartment. The ice maker receives water from the water ...Read moreinlet valve, where it is frozen into ice cubes. The ice cubes are then ejected from the mold into the ice bucket where you can easily collect the ice cubes at your convenience. If any one of the parts in the unit is faulty, you will need to replace the entire ice maker assembly. The signs of a faulty assembly include difficulties making ice, sudden unusual noises, and large blocks of ice in the ice mold or tray.

This is a door stopper designed for LG refrigerators. This white plastic stopper is made to ensure the refrigerator door closes properly. If your fridge door is not closing entirely, or if this closer is damaged, it needs to be replaced to fully keep your door closed. This closer is located on the bottom of the right refrigerator door and...Read more requires a screwdriver to replace it. This closer is a genuine OEM part and is sold individually.

This door basket or door shelf is a genuine OEM replacement which is compatible with LG refrigerators. It is made of clear plastic, and it fits onto mounting brackets on the inside of the refrigerator dor. This basket does not require any mounting hardware. It is used to store and organize food items to help maximize the storage space in ...Read moreyour fridge. It is common for the door basket to wear down over time due normal aging or heavy loads. You will need to replace the basket if it is visibly damaged or unstable to avoid breaking your food items or damaging the interior of the fridge. Each door basket is sold individually.

This ice bucket assembly is designed to store and dispense ice within select refrigerator models. It includes both the ice bin and the auger mechanism, which rotates to push ice through the dispenser when activated. The assembly is intended to replace a damaged or malfunctioning unit, restoring full ice dispensing functionality. Measuring...Read more approximately [insert dimensions if known], it is constructed from durable, food-safe plastic and features a clear finish for easy visibility of ice levels. Installation is straightforward and typically requires no tools—simply remove the old assembly and slide the new one into place, ensuring it aligns securely with the dispenser mechanism. Before purchasing, verify compatibility with your refrigerator model to ensure a proper fit.