GLGFS66ASD Frigidaire Range - Parts

This valve automatically cuts off the flow of gas at a certain pressure.

A light or fan that responds only when its control is moved may have a worn rocker switch. This replacement switch mounts in the appliance panel and controls power to the assigned feature. Its exact job varies by model, so check the wiring diagram before installation. First inspect the bulb or fan, wiring, terminals, and power supply beca...Read moreuse another fault may be responsible. Turn off the circuit breaker and confirm the appliance has no power. Allow the cooking area to cool and wear gloves around sharp panel edges. Label each wire, avoid pulling on the wire itself, and make sure every terminal fits tightly during reassembly.

This part does not include the electronic control board. It is just the overlay or touch panel.

Used for both bake and broil. This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

This surface burner igniter and orifice holder assembly is a genuine replacement part designed for select rear burners on compatible gas ranges. It combines two essential functions: the igniter electrode generates the spark needed to ignite the gas, while the orifice holder directs the gas flow to the burner head for a consistent and cont...Read morerolled flame. This integrated assembly ensures reliable ignition and efficient burner performance. It is engineered to meet original manufacturer specifications, providing a secure fit and dependable operation. Common symptoms of failure include delayed ignition, uneven flames, or burners that fail to light. Always verify compatibility with your specific model before installation.

12K

This burner head is used on gas stovetops. It is located underneath the burner cap.

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.