EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GLGF389GSA Frigidaire Range - Instructions

All Instructions for the GLGF389GSA
76 - 90 of 120

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove top was old and scratched and stained
  • Stephen from Hazlet, NJ
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Swapped out old top for new looks like a brand new stove!
Was this helpful?
Thank you for voting!
Aluminium foil fused to the panel
  • James from Durham, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the two back screws, slid out the old panel, then fitted in the new panel (it fit perfectly) and replaced the screws. Five minutes, tops.
Was this helpful?
Thank you for voting!
handle broke
  • Gary from Reno, NV
  • Really Easy
  • Less than 15 mins
  • Screw drivers
unscrewed old and screwed in new
Was this helpful?
Thank you for voting!
oven would not stay on
  • Mark from AuGres, MI
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
remove belly pan ,pull draw out easy acsess remove screws and replace
Was this helpful?
Thank you for voting!
Men Should Not Use The Oven
  • David from Suttons Bay, MI
  • Really Easy
  • Less than 15 mins
Delivery was fast. Two screws to remove the old oven panel. Slipped in the new panel and tightened the screws with my fingers. Job completed. It was as easy as that.
Was this helpful?
Thank you for voting!
Needed to install an anti-tip bracket on my stove.
  • Daniel from Provo, UT
  • Really Easy
  • Less than 15 mins
  • Socket set
Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!
Was this helpful?
Thank you for voting!
Oven handle brittle and broke in two.when I dropped a pot on it.
  • Wayne from Olathe, KS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
It was easy once I got screws that work.Old screws and handle had machine screws that held handle on.Order screws with handle so you can install immediately...
Was this helpful?
Thank you for voting!
Oven not heating up properly
  • Larry from Jordan, AR
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I removed back cover and replaced the probe. The troubleshooting info indicated this is the problem 99% of the time. Guess what, it did not help! Further checks indicate that broil element may be out. Am going to resistance check and order if that is the problem.
Was this helpful?
Thank you for voting!
Broken Handle
  • Charles from Lake Mary, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Really easy to replace handle. However, because the new handle does not have the metal inserts to receive the attaching screws (!appearently a bit cheaper to make!), I am concerned that it will not last as long. I could find no reference to new attaching screws so used the old ones...hope it works!
Was this helpful?
Thank you for voting!
Knob on gas range wore out
  • Doug from Charlotte, NC
  • Really Easy
  • Less than 15 mins
I just slapped the new one on.
Was this helpful?
Thank you for voting!
no heat
  • John M. from PLEASANT PRAIRIE, WI
  • Easy
  • Less than 15 mins
  • Nutdriver
Replaced the oven probe because a no heat problem. also had to replace the oven control. That was a bit expensive but still saved me hundreds not calling a serviceman. By the way, it works like new.....
Was this helpful?
Thank you for voting!
replace lower oven floor
  • ed from petaluma, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removded 2 screws at rear of panel, moved panel toward rear of oven, lifted up and out. Slid in new panel in front groove then lowered onto oven floor and secured it with the 2 screws at rear of oven.
Was this helpful?
Thank you for voting!
inner glass uncleanable
  • Krista from Newtown, CT
  • Easy
  • 15 - 30 mins
  • Screw drivers
Took door apart, went online to partselect, ordered new glass, and put it back together. Oven looks like new. Makes sense to order the isolation as well when you do the repair
Was this helpful?
Thank you for voting!
oven took too long to heat up
  • JAONNE from GAFILED, NJ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
un bolted the 6 nut driver heads found probe wire un pluged it 1/4 turn from lock it was in and pull out replace slide in new probe 1/4 turn to lock it in place replace nut driver self tappers and test simple!!
Was this helpful?
Thank you for voting!
really bad ugly streaks inside of glass
  • John from Hemet, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door . Just reverse the way you take it apart to put it back together.
Was this helpful?
Thank you for voting!
All Instructions for the GLGF389GSA
76 - 90 of 120