- Home
- GLGF376DSF
- Instructions
GLGF376DSF Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Outer glass was broken
3 of 8 people
found this instruction helpful.
-
Kristie from Alexander City, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed 2 screws in door handle. Removed cover and slid glass into place return cover and reattached handle with screw.
Was this helpful?
Thank you for voting!
Oven bottom panel
1 of 2 people
found this instruction helpful.
-
Maria from NEW ORLEANS, LA
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed old panel/removed and inserting new panel and used same 2 screws to secure in place.
Was this helpful?
Thank you for voting!
Timer light had become dim due to the electric outages suffered from our provider
1 of 2 people
found this instruction helpful.
-
J. Fred from Patriot, OH
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers
The part did not have the proper cover, it was plain. I had to remove the electric board from the old housing and the new housing and install the the new board in the old housing. Other than that it would have been a 15 minute job. I had to be very careful not to damage the old plastic housing and I was tenitive, if I broke it I would hav
... Read more
e had problems. The new part should either come with the front ID cover or it should be recommended to buy. (It looks as though it is a plastic glue on cover, but would be ruined if I tried to remove the cover from the old housing) No problems other that mentioned.
Read less
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
temp was not reading right
3 of 10 people
found this instruction helpful.
-
santa from glassboro, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver
remove back panel took out old part splice wire replaced
Was this helpful?
Thank you for voting!
Lens cover for oven light broke.
0 of 1 people
found this instruction helpful.
-
Amy from Corona, CA
- Really Easy
- Less than 15 mins
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
Two of theTop gas burners would not spark
0 of 2 people
found this instruction helpful.
-
Robert R from Lewistown, PA
- Easy
- Less than 15 mins
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.
Was this helpful?
Thank you for voting!
Cracked inside glass
0 of 2 people
found this instruction helpful.
-
patti from Greer, SC
- A Bit Difficult
- 1- 2 hours
-
Screw drivers
I actually watched Youtube while I was changing it. This video was not actually the same make up of my oven, even though the I typed in the model number. I manage to figure it any with the steps anyway. It was harder then I expected but not horrible. I think I did pretty well for a women. Patti
Was this helpful?
Thank you for voting!
Broken globe in oven and burnt out light bulb
0 of 5 people
found this instruction helpful.
-
Sharon from Foley, AL
- Really Easy
- Less than 15 mins
Easy as 1-2-3
Other Parts Used:
Was this helpful?
Thank you for voting!
replace lower oven floor
-
ed from petaluma, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
removded 2 screws at rear of panel, moved panel toward rear of oven, lifted up and out. Slid in new panel in front groove then lowered onto oven floor and secured it with the 2 screws at rear of oven.
Was this helpful?
Thank you for voting!
Men Should Not Use The Oven
-
David from Suttons Bay, MI
- Really Easy
- Less than 15 mins
Delivery was fast. Two screws to remove the old oven panel. Slipped in the new panel and tightened the screws with my fingers. Job completed. It was as easy as that.
Was this helpful?
Thank you for voting!
Needed to install an anti-tip bracket on my stove.
-
Daniel from Provo, UT
- Really Easy
- Less than 15 mins
-
Socket set
Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!
Was this helpful?
Thank you for voting!
Oven handle brittle and broke in two.when I dropped a pot on it.
-
Wayne from Olathe, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
It was easy once I got screws that work.Old screws and handle had machine screws that held handle on.Order screws with handle so you can install immediately...
Was this helpful?
Thank you for voting!
handle broke
-
Gary from Reno, NV
- Really Easy
- Less than 15 mins
-
Screw drivers
unscrewed old and screwed in new
Was this helpful?
Thank you for voting!
oven would not stay on
-
Mark from AuGres, MI
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
remove belly pan ,pull draw out easy acsess remove screws and replace
Was this helpful?
Thank you for voting!