- Home
- GLEF387FCC
- Instructions
GLEF387FCC Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range not heating properly
4 of 7 people
found this instruction helpful.
-
Eloisa from SPOKANE VLY, WA
- Very Easy
- 15 - 30 mins
-
Screw drivers
The youtube video clearly described how to remove the back panel and how to replace the probe.
The repair took maybe 20 minutes to complete and 1/2 of that time was spent cleaning behind and underneath the range!
Range is working perfectly now!
The repair took maybe 20 minutes to complete and 1/2 of that time was spent cleaning behind and underneath the range!
Range is working perfectly now!
Was this helpful?
Thank you for voting!
N/A
4 of 7 people
found this instruction helpful.
-
Dineshbhai from Rincon HWY21, GA
- A Bit Difficult
- Less than 15 mins
-
Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
My five-year-old Frigidaire Gas stove was giving an F 10 code.
4 of 7 people
found this instruction helpful.
-
Tracy from Summerville, SC
- Really Easy
- 30 - 60 mins
-
Screw drivers
I looked up the problem on YouTube and it said it was the oven temperature probe was going out. So I ordered the probe and it was shipped out, received within two days. Took out a few screws on the back of the stove installed it, put it all back together and it’s working perfect.
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people
found this instruction helpful.
-
Larry from COZAD, NE
- Really Easy
- 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 people
found this instruction helpful.
-
junius from WICOMICO, VA
- Really Easy
- 1- 2 hours
-
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 people
found this instruction helpful.
-
Ronald from Ozone Park, NY
- Easy
- 1- 2 hours
-
Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,
It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
The part I ordered has 5 connections and the part to be replaced has 7 connections. I had to ask a friend who is expert in electrical wiring to help.
2 of 2 people
found this instruction helpful.
-
Phin from HARRISBURG, PA
- Difficult
- 1- 2 hours
-
Pliers, Screw drivers
My friend used a tester to determine where each wire was supposed to connect to. I'm not sure what he did with the extra connections.
Bottom line is this part should work but you need an expert to do it for you because it's, like I said, not exactly like the one to be replaced.
Bottom line is this part should work but you need an expert to do it for you because it's, like I said, not exactly like the one to be replaced.
Was this helpful?
Thank you for voting!
run away temp
3 of 5 people
found this instruction helpful.
-
James from ELKHORN, WI
- Really Easy
- 30 - 60 mins
-
Nutdriver
I changed the temperature sensor and tried again. The stove again went on temp runaway and it was suggested to replace control board which is out of stock.
I will have to toss out this stove and buy new as you and no else has this part.
I will have to toss out this stove and buy new as you and no else has this part.
Was this helpful?
Thank you for voting!
Range displayed error code F10
2 of 2 people
found this instruction helpful.
-
Timothy from Palm City, FL
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Unplugged range; removed back cover; removed old oven probe. Installed new probe; replaced cover; connected power and turned on range - that simple. My only issue was probe was shipped in bubble rap and unit was slightly damaged (bent). Once straightened, the probe could be installed. Probe should have been shipped in sturdy cardboa
... Read more
rd cylinder or box. I called customer service, they were very nice, and noted my feedback on my account in case the unit fails prematurely.
Read less
Was this helpful?
Thank you for voting!
Burner not controlable
2 of 2 people
found this instruction helpful.
-
Royce from KEENE, TX
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
oven was over heating temp. of oven keep climbing
2 of 2 people
found this instruction helpful.
-
Herbert from MARIETTA, OH
- Very Easy
- Less than 15 mins
-
Nutdriver
removed screws from back cover then pulled elect. plug apart. removed screw pulled out probe installed new probe put cover back on very easy only problem was that it said that 88% of time would fix the problem. will this time it didn't work oven still over heating.
Was this helpful?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
2 of 2 people
found this instruction helpful.
-
Nelson from FRUITHURST, AL
- Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Was this helpful?
Thank you for voting!
Oven would not heat or sometimes hold heat to set temp
2 of 2 people
found this instruction helpful.
-
TRACY from NEW PHILA, OH
- Easy
- 15 - 30 mins
-
Nutdriver
I was able to find the most common reason for my oven's symptom by searching online. I searched for the part I needed but was not confident that I would get the correct part until I looked on partselect.com. After verifying the part number with my owners manual and looking at the video on their website, I decided to order. PartSelect ship
... Read more
ped the part as expected, and I was able to install it in less than 30 minutes. The only tool needed for installation was a nut driver. My oven is now working like new.
Many thanks to PartSelect for their comprehensive website and fine service.
Many thanks to PartSelect for their comprehensive website and fine service.
Read less
Was this helpful?
Thank you for voting!
The range element was not coming on
2 of 2 people
found this instruction helpful.
-
William from BENTON, IL
- Really Easy
- 15 - 30 mins
-
Socket set
After settling that it was the Surface Element Switch, ordering and securing the switch, the first step was to disconnect the power to the Oven/Range. Next pull out the Range and remove the back and disconnect the switch from the top of the Range. Using the new switch I removed the wire connectors from the old switch and reconnected them
... Read more
to the new switch in the same spot that they came from. After connections were secure I reattached the switch to the back of the Range and reattached the back of the Range. When everything was back in place the power source was reconnected and that was it.
Read less
Was this helpful?
Thank you for voting!
burners 1 would not do anything burned out 2 when from normal to out of control heat would not keep a constance heat
2 of 2 people
found this instruction helpful.
-
rick from Delta, OH
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
turned off breaker 3 Phil screws open door and on inside range top I would reconmend a board to hold top up square tip for cross bar and pliers to pull wires off fit perfect works really nice
Other Parts Used:
Was this helpful?
Thank you for voting!