EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GLEF384GBA Frigidaire Range - Instructions

All Instructions for the GLEF384GBA
31 - 45 of 144

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken lens over oven light
11 of 22 people found this instruction helpful.
  • Leslie from Warsaw, VA
  • Really Easy
  • Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!
Burner indicator light lense broke off
5 of 5 people found this instruction helpful.
  • Kathy from NEW BERN, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
The light apparatus was loose behind the panel. Remove the remaining part of the lens. Install the new lens from the outside of the panel and hold it in position, protruding into the inside of the panel. Slide the light apparatus onto the lens from the inside, allowing the bracket to hold it in place - it will be spring loaded, which will hold it in place.
Was this helpful?
Thank you for voting!
old element coil burned apart breaking the circuit.
6 of 8 people found this instruction helpful.
  • James from WARRENTON, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
removed the old burner and put the new one in it's place.
Was this helpful?
Thank you for voting!
The elements were not heating up
6 of 8 people found this instruction helpful.
  • Tanya from KALISPELL, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Was this helpful?
Thank you for voting!
Front glass broke(shattered) while moving
5 of 6 people found this instruction helpful.
  • steven from WILLIAMS, IN
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Step 1 Clear frame surface of any debris Step 2 Back out four (4) screws in bottom of glass holder Step 3 insert glass in to the top and allow to drop into the bottom channel. This may take some finesse Step 4 tighten 4 screws Step 5 clean up area and pick up tools
Was this helpful?
Thank you for voting!
Rusted leveling foot
6 of 9 people found this instruction helpful.
  • Melinda from Three Rivers, MA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I couldn't unscrew the leveling foot because it was rusted and corroded. The bracket holding it was easy to remove so I took the bracket with the corroded foot off and replaced it with the new foot and bracket. Very simple. I made sure I oiled it so it wouldn't rust again.
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people found this instruction helpful.
  • ANGELA from MEBANE, NC
  • Very Easy
  • Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Broken ; oven door inner glass
5 of 6 people found this instruction helpful.
  • Garland Futrell from CHESAPEAKE, VA
  • Very Easy
  • 1- 2 hours
  • Screw drivers, Socket set
Watched the repair video on your web site. Used the video as a step by step guide in the actual repair.
Was this helpful?
Thank you for voting!
half the element was working
5 of 6 people found this instruction helpful.
  • nicole from geneseo, NY
  • Easy
  • 30 - 60 mins
  • Wrench set
I am a DIY kind of wife. My husband works late most nights and I get home in the afternoon. It was really quit simple except for the element plug slipped into the back of the stove. So I had to pull the stove out from the wall and take a couple of screws out of the back and push the plug back through. It was scarry for a minute but it all ended up just fine and we had a wonderful dinner that night.
Was this helpful?
Thank you for voting!
Oven temperature ran very high
5 of 6 people found this instruction helpful.
  • Juliette from BRINKLEY, AR
  • Easy
  • 30 - 60 mins
  • Screw drivers
When the part arrived, I open the box. Cut off my breaker to the range. Pulled back the stove and unscrewed the back. Located the probe, unscrewed the one screw that held it in. I then unclamped the white connectors, remove the old probe, replaced it with the new one reclamped the connectors. Screwed it back into the range. Replaced th e back and screwed that back together. It was so easy I was very proud of my self. I cut the breaker back on and cooked a can of biscuits just to see if it really worked. And it did. My bread was not burned, it was cooked to perfection.
Was this helpful?
Thank you for voting!
Crack in inner door glass
6 of 9 people found this instruction helpful.
  • Robert from Richmond, IN
  • Really Easy
  • 1- 2 hours
  • Screw drivers
Removed two screws that are attached to handle then removed four screws from bottom edge of oven door. I was then able to remove the outer door glass,this gave me access to the three inner glasses. After removing the retainer for the glass assembly,I was able to remove all three and replace the inner one.I reversed this proceedure to re assemble.
Was this helpful?
Thank you for voting!
Switch and Burner went out.
4 of 4 people found this instruction helpful.
  • Lamar from ARLINGTON, TX
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
Replaced switch by according to video with no issues, Terminals were nearly identical as the new switch.

The terminals on the new burner were not located in the same position as the terminals on the old burner. I had to reference the wiring diagram to locate the correct wire to terminal location. There was not enough slack in t he wires to position the new burner in the same position as the old burner. I had to rotate the new burner so the wires would reach. This cause me to have to rotate the warming burner because rotating the new burner, the terminals interfered with the terminals on the warming burner. I also had to reposition some of the wires so they would not contact the burner and terminals.
Was this helpful?
Thank you for voting!
slow to get to temperature
4 of 4 people found this instruction helpful.
  • SHAUN from ALBUQUERQUE, NM
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
first the temperature sensor then the igniter. started to do the igniter by using common sense then I used YouTube which made it a lot faster.
the temperature sensor installs from the back of the stove, the igniter installs from thr front ie, the drawer and inside oven.
Was this helpful?
Thank you for voting!
The bake element burned in half
4 of 4 people found this instruction helpful.
  • David from SHELTON, WA
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Quite easy: Removed the two hex head screws with a 1/4 inch nut driver. Gently pulled the old element out of the rear of the range with the connectors still attached. Next I disconnected the connectors from the element and attached a small "paper binder" clip to each of the connector wires to keep the connectors from pulling back through the "Hole". Lastly, I connected the two connectors to the new element (released the clips) and gently pushed the unit back into place and re-secured the hex screws. ALL DONE! Very very easy....
Was this helpful?
Thank you for voting!
bottom oven element burned out
5 of 7 people found this instruction helpful.
  • Sandra from Woodstock, GA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
repair was exceptionally easy. Did not need the fiberglass tape that was mentioned in online repair steps. Just slipped the wires off and then back on the new element. Any 70 year old can do.
Was this helpful?
Thank you for voting!
All Instructions for the GLEF384GBA
31 - 45 of 144