- Home
- GLEF378CBF
- Instructions
GLEF378CBF Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Storage drawer hard to open and was hanging down on one side.
1 of 2 people
found this instruction helpful.
-
Nathan from ST Joseph, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the drawer, removed and replaced the guides on both sides in the front and replaced the drawer.
Was this helpful?
Thank you for voting!
Arcing could be heard (and later seen) inside the switch
3 of 8 people
found this instruction helpful.
-
Joel from North Mankato, MN
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Switch was easy to replace. Some hex head screws to remove the panel and two screws to remove the switch. Though the plug in positions were totally different, all the quick connect terminals were marked on both switches.
Was this helpful?
Thank you for voting!
One Of The Front Drawer Guides Broke
1 of 2 people
found this instruction helpful.
-
RICHARD from WABASH, IN
- Really Easy
- Less than 15 mins
Removed the drawer. Inserted the new glide tab into a hole in the side. Inserted the drawer slides in the the glide. Closed drawer--done! Works fine. Probably only 5-10 minutes.
Was this helpful?
Thank you for voting!
oven door BROKEN GLASS
4 of 11 people
found this instruction helpful.
-
elizabeth from fall river, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove two screws from bottom of inside oven door slide oven door up of hinges in side of door has 2 more screws when removing hold handle it does come off at very bottom of door remove all screws cover comes off remove new glass from package and place over brackets put oven door cover back on put screws back on slide back on bracket pu
... Read more
t last screws on
Read less
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Inner window on my Frigidaire electric stove oven cracked
1 of 3 people
found this instruction helpful.
-
Jonathan M. from Sierra Madre, CA
- Easy
- 1- 2 hours
-
Pliers, Screw drivers, Wrench (Adjustable)
On this website, I found an instruction manual for this stove. There were 2 pages about how to change the glass on the oven door, including diagrams. I'd also checked a generic youtube video on changing inner glass on oven doors too, although the hinges in the youtube demo weren't exactly like those in mine. I printed out the instruct
... Read more
ions, checked the oven door to make sure the hinges looked like those in the diagrams, set aside a couple of hours on a free day with no other distractions, and did the job. I just kept removing screws from the inside oven door, peeling back the layers of the onion, until I got to the innermost glass, which was cracked. Put the new glass in, put it back together. On youtube the guy said it would take 20 minutes. It took me about an hour. Saved a ton of money by doing it myself.
Read less
Was this helpful?
Thank you for voting!
Oven would not get up or stay up to selected temperature
0 of 1 people
found this instruction helpful.
-
wondell from Winnemucca, NV
- Easy
- Less than 15 mins
-
Nutdriver
Pull stove out to get behind it,unplug temperature probe plug. Remove temp probe from oven by removing the screw holding it in place on back of oven. Cut plug off temp probe unit leaving as much lead wire as possible on plug end. Strip wires on new probe and end of plug wires(one quarter inch). Then I used two small butt connectors to joi
... Read more
n the stripped wires,one for each pair of wires. Two small wire 'nuts' may also be used as the connections are outside the oven and not exposed to the heat of the oven while it is in operation. Hope this helps the inexperienced 'do it yourselfers'--:)
Read less
Was this helpful?
Thank you for voting!
Had broken and missing parts.
0 of 1 people
found this instruction helpful.
-
Calvin from Versailles, MO
- Easy
- 15 - 30 mins
Removed drawer and replaced broken and missing parts. Very easy when you have correct parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken drawer glide
1 of 4 people
found this instruction helpful.
-
Richard from Greenwich, NY
- Really Easy
- Less than 15 mins
Fed ex dropped the part off at 7 one night, had it repaired by 7:05. Popped the broken glide off, popped the new one in. Easier than easy. Took longer to empty the drawer and remove it than to do the repair.
Was this helpful?
Thank you for voting!
Best deal on the internet for a factory grate.
0 of 1 people
found this instruction helpful.
-
Aaron from Miamisburg, OH
- Really Easy
- Less than 15 mins
Ge wanted over a hundred dollars for the same part you charged only $80. Thanks. I'll be buying again.
Was this helpful?
Thank you for voting!
Broken-Missing Front Drawer Glides
0 of 1 people
found this instruction helpful.
-
Michael from Anchorage, AK
- Really Easy
- Less than 15 mins
They snap right into place in the holes at the front of the stove and the drawer is then slid back onto the glides and works properly once again.
Was this helpful?
Thank you for voting!
the drawer glides were borken
0 of 1 people
found this instruction helpful.
-
SHEILA from BECKLEY, WV
- Really Easy
- Less than 15 mins
I removed the brokne ones and replaced them with the new ones.
I appreciated PartSelect giving a picture of the parts so i didn't have to search for the part number.
I appreciated PartSelect giving a picture of the parts so i didn't have to search for the part number.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken Drawer Glide
0 of 1 people
found this instruction helpful.
-
Barbara from Fairbanks, AK
- Really Easy
- Less than 15 mins
Took no time at all to fix and is as good as new. Hooray!
Other Parts Used:
Was this helpful?
Thank you for voting!
drawer glides broke
0 of 1 people
found this instruction helpful.
-
Charles from Greenfield, IN
- Really Easy
- Less than 15 mins
took old parts out and popped in new glides.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer Glide Broke..
0 of 1 people
found this instruction helpful.
-
Rita from East Boston, MA
- Really Easy
- Less than 15 mins
No problem..... I just had to slide the new one in..It took all of 5 minutes...
I searched so many different places for the part until a friend told me about Part Select!!!
Thank you so much...
I searched so many different places for the part until a friend told me about Part Select!!!
Thank you so much...
Other Parts Used:
Was this helpful?
Thank you for voting!