Fast Shipping All Original Manufacturer Parts Genuine Quality 1 Year Warranty

Models > GFD140 > Instructions

GFD140 Caloric Refrigerator - Instructions

All Instructions for the GFD140

Door catch broken

Push new catch in the opening, close the door and VOILA! the door stays closed. Please note that the cost of this part is exorbitant- it's worth about 50 cents but with shipping it cost about $11.00. Check your local hardware store first.

Parts Used:

Dryer Door Catch Kit

Martin from Grapevine, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Male door latch would no longer catch.

After ordering the part, I read the information left by other users. I used a screw driver to pop out the piece, and then put the new latch in the opening. A gentle pop with the side of my hand, and the door latch went right into place. Who knew there was a second door latch on the other side that could've been used?

Parts Used:

Dryer Door Catch Kit

Joan from North Myrtle Beach, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Latch was broken so door wouldn't close

This was real easy just slid the latch in front panel and attached to latch assembly to the door. The repair was about 45 seconds.

Parts Used:

Dryer Door Catch Kit

Doug from Kearney, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Door Latch broken

Ordered part ( door latch ) flowed instructions easily fixed same.

Parts Used:

Dryer Door Catch Kit

Eugene from Arlington, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

the plastic latch broke

im a car mecanic it was easy

Parts Used:

Dryer Door Catch Kit

greg from phoenix, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Male end of door catch broke

First, I replaced the male end which was just two screws and simple replacement of pushing the fastener into the door frame. When finished I noticed the female end was damaged as well. Glad the female part came as well. This required taken off the front trim around the door (four screws - 2 each side) and then the door. The installing of the female end was easy with a little push. The damaged female end was already hanging out so easy to grab and remove. Otherwise I would have had to remove the front panel. Note You need to put the door trim back on before reattaching the door.

Parts Used:

Dryer Door Catch Kit

George from Hamden, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

latch broke

Replace with new latch.

Parts Used:

Dryer Door Catch Kit

Jack from Kirkland, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Dryer door would not stay closed

I did a quick research online and found PartSelect to have the best price. I ordered my part on Monday 8/6 and to my tremendous surprise FedEx delivered it Tuesday 8/7!! I did not pay for overnight delivery. My son happened to come by that day and he took a small flathead screwdriver, pried the old one out and inserted the new part. Done in 5 minutes! PartSelect will be my supplier from now on.

Parts Used:

Dryer Door Catch Kit

Ruth B from Hempstead, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

broken door catch: female half

noticed that male half was in good working order, so I just snapped in the new female half; without any tools. easy repair!

Parts Used:

Dryer Door Catch Kit

Allen from Seattle, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

All Instructions for the GFD140

Back to Top