GFB760V General Electric Food Waste Disposer - Parts

The sink flange attaches to your sink drain opening and provides a connection to mount the disposal unit to the sink itself. If your food waste disposer is leaking, there are a few places that you should inspect. If the leak appears to be coming from around the connection to the sink, look carefully at the sink flange, as there could be a...Read moren issue with the flange itself, or its gaskets. Remember to disconnect the power from your food waste disposal unit before beginning this repair. This OEM replacement part has an outer diameter of approximately 4.5 inches, and an inner diameter of approximately 3 inches.

This item is sold individually. The fiber sink flange gasket works with your food waste disposer. This part creates a seal that prevents any water from leaking. It is positioned between the sink flange and the disposal mounting ring. The flange may break apart over time and cause leaking and will need to be replaced. The flange gasket is ...Read moredonut shaped and is 4 inches in diameter. Before beginning this repair make sure the power to the food waste disposer has been disconnected. This is an OEM part that is obtained right from the manufacturer.

This is an elbow outlet and gasket for a food waste disposer or garbage disposer. This part connects the disposer to the drain pipe in your home. If you notice a blockage or a leak, you may need to replace this part. It is black in color, made of plastic, and measures about 6 inches tall.

This support ring, also known as mounting ring, is a genuine OEM replacement part for use in food waste disposers. It is a circular plastic piece with an outer diameter of 4.75 inches. It is found inside the disposer housing where it provides support and stability to the unit. The ring helps to evenly distribute the weight of the disposer...Read more and waste evenly, so that the disposer does not fall out of alignment. Over time, the support ring may break due to the continuous grinding within the unit, and the exposure to moisture and waste. If the ring is no longer able to stabilize the unit, you will notice food and waste leakage, excessive vibrations, and damage to the disposer components. To begin this repair, first disconnect the disposer from the mounting assembly, and pull out the faulty ring. Place the new ring in its place and reattach the disposer to the mounting assembly.

This stopper is designed for use with garbage disposals. If your disposal will not start, will not run properly, or is starting to smell bad, repairing it could be as simple as replacing the stopper. As the stopper ages, the rubber seals might become brittle or worn down. This means that it might not stay in place while the disposal is cy...Read morecling, and when it is not cycling it will no longer seal the drain well enough to contain odors. This stopper is sold individually, and has an approximate diameter of three inches. You need no tools to successfully replace this part.