GCPUMP Jenny Engine - Parts

The piston connects to the connecting rod and is made of metal. This is a genuine Jenny replacement part for use in pumps and compressors. This item is sold individually but also includes the rings and the pin. A wrench might be required during the replacement of this part. It will need to be replaced if it breaks.

This suction valve, also known as a discharge valve, is sourced from the original equipment manufacturer for use in air compressors. It is responsible for ensuring that air is drawn into the cylinder when the piston moves downward. When the piston moves back up during the compression stroke, the suction valve closes to prevent the compres...Read moresed air from flowing back into the suction line. It includes the valve spring, valve retainer, valve seat, and valve guard. Over time, the valve may wear out, become clogged with debris, or become damaged, leading to overheating, reduced power output, and low pressure. Begin the repair by disconnecting the compressor from the power source. Locate the suction valve in the pump head and remove the valve guard. Remove the valve seat and detach the suction valve and spring. Place the new valve components in the pump head and ensure they are securely fitted.

This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damag...Read moreed, leak, or restrict the flow of fluid through the pump. If your pump is leaking on/around the discharge valve, or if the pump has higher pressure or a low flow rate, this discharge valve would be worth inspecting to see if it needs replacing. Replacing this assembly is easy and requires you to first power off the pump and disconnect the pump head and gasket. You can then remove the old assembly and install the new one. It is recommended that you replace the gasket at this juncture as well, but it is not mandatory. With the new assembly installed, reinstall the pump head and test your pump.

This manifold tube directs airflow or fluid between system components. Designed for proper routing and sealing, it supports efficient operation and dependable performance.

This is an authentic Jenney replacement part manufactured for use with air compressors. The connecting rod is used to link the drive shaft and piston. This connecting rod assembly is available as an individual replacement part, please see model diagram for associative parts.