EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GCG38BCL0 Frigidaire Range - Instructions

All Instructions for the GCG38BCL0
91 - 105 of 228

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Would turn oven on, gas smell and would not light .
0 of 1 people found this instruction helpful.
  • Michael from Forest City, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
After removing heat shield, removed heating element (make sure you have the right bit, I stripped one of the screws). Cut wires , making sure to mark them. Reconnected and it worked like new! Saved a bunch of money,thank you!
Was this helpful?
Thank you for voting!
oven was slow on lite up
0 of 1 people found this instruction helpful.
  • BILLY from DUCKHILL, MS
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
removed bottom plate in oven removed three screws and cut two wires.
Was this helpful?
Thank you for voting!
Oven was slow to light, strong gas smell, long time to reach set temperature
0 of 1 people found this instruction helpful.
  • Gary Warren from Alexandria, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Unplugged stove, removed floor of oven, removed two screws holding igniter, cut wires to igniter, installed new igniter, cut and stripped wires on new igniter and leads, connected new ingiter with supplied ceramic wire nuts, tested (worked perfectly!), then replaced oven floor.

It was a snap!
Was this helpful?
Thank you for voting!
My oven would glow, but wouldn't heat.
0 of 1 people found this instruction helpful.
  • Steve from Macomb, MI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Socket set
I first removed the 2 screws that held the oven floor in place. Once removed, I remove the cover plate that covered the ignitor.

In order to get to the ignitor wires, I had to remove the drawer. Once the drawer was removed, I marked which wire went to which spot on the ignitor, then cut the wires. I then removed the old ignitor by removing 2 screws. I then attached the new ignitor with the 2 screws and attached the wires using the enclose wire nuts.

The complete process was very easy, taking less than half an hour. The part with shipping was just over $50. If I paid someone to fix my problem it would have cost at least $200. I'm sure galad I found this web site.
Was this helpful?
Thank you for voting!
Oven would not light..
0 of 1 people found this instruction helpful.
  • Jim from Oceanside, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
cut wires and removed the burner . Removed the ignighter and installed the new with nut driver. slipped the burner back in place and nutted the wires...Wallagh!!! fired right up...
Was this helpful?
Thank you for voting!
Oven would not light; gas odor
0 of 1 people found this instruction helpful.
  • Emily from Conneaut, OH
  • Really Easy
  • 15 - 30 mins
  • Wrench (Adjustable)
This was a very easy project.
-First, I removed the two bolts holding the old igniter. Second, I clipped the wires then stripped them. Next, I connected the wires with the wire nuts. Finally, I attached the igniter with the old bolts. I plugged it back in, and it worked better than ever. My husband was very impressed that I repa ired our stove myself!
Was this helpful?
Thank you for voting!
Oven wouldn't get hot..smell of gas
0 of 1 people found this instruction helpful.
  • Eric from Chicago, IL
  • Easy
  • 15 - 30 mins
  • Wrench (Adjustable)
Replaced the flat style oven igniter. Turn off gas and unplug oven. Removed the broiler drawer, cut wires, unscrewed oven igniter (using a small/medium adjustable wrench), connected wires, fastened new igniter to bracket, spliced wire, twisted together, plugged oven back in, turned gas on, turned on oven after a few minutes...worked gre at.
Was this helpful?
Thank you for voting!
glo plug wouldn/t ignite
0 of 1 people found this instruction helpful.
  • William from Smyrna, DE
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took out the old (2 screws) put clip on wires and put the new part in. Simple
Was this helpful?
Thank you for voting!
Oven would not heat up
0 of 1 people found this instruction helpful.
  • Steve from Canton, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Checked voltage supply to oven igniter, had 120 v
to oven igniter, but igniter was not glowing.
Was this helpful?
Thank you for voting!
Gas valve would not turn on.
0 of 1 people found this instruction helpful.
  • Todd from Matteson, IL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Socket set
I exposed the ignitor through the inside of the oven and then removed the two screws that held it in place. I then cut the wires underneath the stove ans reconnected them to the new part with the wire nuts provided. It was a simple repair.
Was this helpful?
Thank you for voting!
Oven Burner Would Not Ignite. Heard the controls click to start oven but no fire.
0 of 1 people found this instruction helpful.
  • Mark from Rockford, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplug appliance. Remove the bottom of the oven (2 screws in back of oven bottom), remove burner cover (2 screws in front and nut in center holding burner). Pull out the bottom storage drawer under the oven and unplug both wires from oven Igniter which are located in the back. One wire plugs into the gas valve and the second wire went into a connector that was on the lower left. I removed the screw on the back oven wall that held the burner so I could remove the burner for ease of work. Remove two screws holding the old igniter. The two screws holding the igniter to the side of the burner were stripped and they took a little time to remove but I replaced them with two new screws I had in my misc. screw drawer and had no issue. Cut the top wire and splice it onto the top wire of the new igniter using the porcelain wire nuts provided. Do the same with the bottom wire. Re-assemble and plug back in. Everything worked perfectly.
Was this helpful?
Thank you for voting!
Replace the oven igniter
0 of 1 people found this instruction helpful.
  • Mike from Hamburg, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Remove the oven drip pan & burner baffle. unscrew & cut leads to remove old igniter. Splice old leads to new using furnished wire nuts and remount. Job would have been easier with oven door removed, but didnt want to create a new project.
Was this helpful?
Thank you for voting!
oven slow to warm and gas smell
0 of 1 people found this instruction helpful.
  • JONATHAN from DEARBORN, MI
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Removed lower burner covers and fan cover to access igniter. Unscrewed igniter and pulled out as far as possible. Marked both wires and snipped them. Twisted on wires from new igniter and mounted igniter. Pulled excess wire thru to back of oven and reassembled covers from first step. Last step was to explain to wife that she needs clean i n there MUCH better.
Was this helpful?
Thank you for voting!
igniter replacement
0 of 1 people found this instruction helpful.
  • Brianna from Livonia, MI
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable)
followed online instructions
Was this helpful?
Thank you for voting!
oven took a long time to preheat
0 of 1 people found this instruction helpful.
  • Brad from Medina, NY
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
took drawer out, removed tin covers, found igniter and removed,snipped off parts to put on new igniter ,wirenutted old to new put back together ,we had ignition! all in all pretty easy job! detailed instructions that came with new part were easy to follow and precice
Was this helpful?
Thank you for voting!
All Instructions for the GCG38BCL0
91 - 105 of 228