GCG1500LW General Electric Trash Compactor - Parts

Fits round or rectangular compactors.

This frame roller assembly allows a trash compactor drawer to glide smoothly in and out, reducing strain and preventing grinding or squeaking noises during operation. When the rollers wear down, the drawer may feel difficult to move, sit unevenly, or produce unusual sounds. Replacing the assembly restores proper movement and helps the com...Read morepactor operate quietly and reliably. Installation is straightforward and typically involves removing the old rollers and securing the new assembly in place.

This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige, and roughly 3 inches wide, and almost 2 inches long. For this repair, you will need a screwdriver set or a multi-screwdriver, a quarter-in...Read morech nut driver bit, and a flat-head bit. You will need to get inside of your trash compactor in order to replace this part. This means uninstalling your appliance from your cabinets.

This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is not completing the compact cycle properly, you may have to test the switch. If you have a multimeter, you can perform a continuity test bef...Read moreore ordering this part to determine if a continuous electrical path is present in the switch. If there is no electrical path in your switch, you will need to replace it. This is an authentic replacement part sourced directly from the original manufacturer.

If your trash compactor is jammed or stuck with the ram in the down position, you may have a faulty or damaged drive gear. The drive gear is located at the bottom of your compactor, and helps the drive motor power the compacting ram. If you notice that your drive gear is broken, damaged, or faulty, look to replace it straight away to avoi...Read mored causing any more damage to the trash compactor. If you notice that the gear is missing teeth, you should replace the part. This part is made of plastic, white in color, and has an approximate outside diameter of 4 1/2 inches.

This motor operates the trash compactor press that helps compacts the trash.

Screws included.