EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GC-J288NKXM LG Refrigerator - Instructions

All Instructions for the GC-J288NKXM
1 - 13 of 13

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace leaking water inlet valve assembly
42 of 75 people found this instruction helpful.
  • Richard from JACKSONVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Was this helpful?
Thank you for voting!
Low water pressure which in turn led to no water and no ice.
7 of 16 people found this instruction helpful.
  • Daniel from ABERDEEN, WA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
Unplugged fridge, shut off water supply disconnected water supply from fridge. Remove screws that hold lower cover on back of fridge, removed screws holding valve assembly to fridge. Disconnect two electrical connections, remove black c-clip on out flow water line, lift fitting on outflow line side and pull water line off. Replace with va lve assembly in reverse order
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people found this instruction helpful.
  • Johnny from MOUNT OLIVE, AL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Slow water for drinking
2 of 4 people found this instruction helpful.
  • Steven from SEBASTIAN, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
Just like on YouTube very easy to do
Was this helpful?
Thank you for voting!
Ice Maker and Water dispenser stopped working
2 of 4 people found this instruction helpful.
  • Donald from BETHPAGE, NY
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Pulled the fridge out.
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.

Super SImple/
Was this helpful?
Thank you for voting!
Lower ice maker water feed froze and caused leak. Needed new water valve.
2 of 5 people found this instruction helpful.
  • Thomas from YORKTOWN, VA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Took pics of original install, removed old valve, water tubes & plugs. Installed new valve, reconnected electronic plugs, water tubes, turned water back on and all has been well since. Thank you for your timely delivery!
Was this helpful?
Thank you for voting!
Valve assembly leaked
2 of 6 people found this instruction helpful.
  • Richard from TORRANCE, CA
  • Very Difficult
  • More than 2 hours
The assembly sent is different than what is on the unit. The connectors do not match. We called and it seems you don’t have the correct part. The only part we have found will only connect the ice maker or the water. It will be a shame if I have to buy a new refrigerator.
Was this helpful?
Thank you for voting!
replace hand screw
2 of 11 people found this instruction helpful.
  • dorothy from SALISBURY, MD
  • Very Easy
  • Less than 15 mins
  • Screw drivers
unfortunately my fridge stopped working. I purchased another but wanted to try and repair the old one. when ew one arrived, the old one was supposed to be put in garage but instead was hauled away. Had delivery return next day but they had as already removed and lost the handle screw for the bottom freezer and the screw that holds handle in place. ordered the handle screw and picked up the nut. very simple to install the screw and put handle back on.
Was this helpful?
Thank you for voting!
All Instructions for the GC-J288NKXM
1 - 13 of 13