GBE26DB Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't heat
4 of 6 people
found this instruction helpful.
-
Jack from Rouses Point, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
I disconnected the oven power, then removed the two screws that hold the element in place, then I pulled the old element out, and connected the new element to the two wires, and reinstalled the two screws. PartSelect provides easy part selection, very quick delivery, and is my first choice for hard to find parts. I have used them in the p
... Read more
ast and am always pleased with the service/price they provide.
Read less
Was this helpful?
Thank you for voting!
Bake element broke in two THANKSGIVING Morining
3 of 6 people
found this instruction helpful.
-
Susan from Rowley, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband simply unscrewed the screws on each side and put on the new bake element. Just need to remember to UNPLUG the stove as he had a few sparks at first . . . other than that, it was simple. Thanks!!!
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person
found this instruction helpful.
-
RICHARD from SHOW LOW, AZ
- Very Easy
- Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
Oven element broken
1 person
found this instruction helpful.
-
Louise from BROOKFIELD, IL
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Unscrewed element connection and replaced with new one! Better than buying a new stove??thank you! We did turned off the circuit breaker!!
Was this helpful?
Thank you for voting!
burner would not heat.
1 person
found this instruction helpful.
-
Jackie from Hughes Springs, TX
- Really Easy
- Less than 15 mins
I unpluged the old burner and pluged the new one in. Repair done in about 2 min,
Was this helpful?
Thank you for voting!
Burner ceramic disintegrated & spalled
1 of 2 people
found this instruction helpful.
-
Gary L from North Tonawanda, NY
- Really Easy
- Less than 15 mins
Pulled buner element out of socket as you would for detailed cleaning. Replaced burner element & drip pan with OEM parts. Fit was perfect, tested burner on all heat ranges, good as new.
Was this helpful?
Thank you for voting!
Large burner on stove not working
1 of 2 people
found this instruction helpful.
-
Cherie from Dowagiac, MI
- Really Easy
- Less than 15 mins
I removed the heating element and noticed that the prongs were corroded. I looked for a model number but couldn't find it so it made it difficult to find a replacement until I got on this website. I found the replacement part and also found that as I checked for other sites for this part this company was the most resonable priced.
T ... Read more he part arrived and I replaced it in seconds. Turned it on and it worked immediately. Super easy.
T ... Read more he part arrived and I replaced it in seconds. Turned it on and it worked immediately. Super easy.
Read less
Was this helpful?
Thank you for voting!
surface element burnout
0 of 1 people
found this instruction helpful.
-
david from wellsboro, PA
- Really Easy
- Less than 15 mins
The repair was just a matter of sliding the old one out and plugging the new one in. The ease of use of this website was wonderful. Super fast shipment. Im very pleased.
Was this helpful?
Thank you for voting!
Old surface element burned out.
0 of 2 people
found this instruction helpful.
-
Royce from Rio Rancho, NM
- Really Easy
- Less than 15 mins
I ordered and received the replacement element, then unplugged the old one and plugged in the new one.
Job done.
Job done.
Was this helpful?
Thank you for voting!
Burners quit working
-
Brenda from Brazoria, TX
- Really Easy
- Less than 15 mins
Bought two new replacement burners,they work great!
Other Parts Used:
Was this helpful?
Thank you for voting!
part of original burner not working
-
SUSAN K from SEDALIA, MO
- Really Easy
- Less than 15 mins
slide new burner in slot and turned on stove. Worked perfectly.
Was this helpful?
Thank you for voting!